{"title":"Electric motors","description":null,"products":[{"product_id":"original-emax-mt4114-brushless-motor-340kv-6s-22-2v-quad-hexa-copter-cw-version","title":"Emax MT4114 Brushless Motor - 340 kV, 6S 22.2 V, CW","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushless motor for multicopters and drones\u003c\/li\u003e \u003cli\u003e340 kV RPM constant, designed for 6S LiPo batteries (22.2 V)\u003c\/li\u003e \u003cli\u003eLoad capacity of up to 2 kg with optimal efficiency\u003c\/li\u003e \u003cli\u003eBall-bearing construction for a long service life\u003c\/li\u003e \u003cli\u003eM3 mounting holes for standard frames\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis brushless motor is used in multicopters and drones as a drive unit for propellers. The 340 kV RPM constant determines the motor's speed behavior at a given voltage. When used with a 6S LiPo battery (22.2 V nominal voltage), the motor delivers optimal performance and operates within its intended operating range.\u003c\/p\u003e \u003cp\u003eThe motor is controlled by an electronic speed controller (ESC), which regulates the speed using pulse-width modulation. The load capacity of up to 2 kg results from the motor's output and enables the design of systems with a corresponding total weight. The ball-bearing system reduces friction and wear during extended operation.\u003c\/p\u003e \u003cp\u003eApplications include racing quadcopters with a freestyle flight profile, camera-carrying flights with moderate system weights, and continuous surveillance flights. The standardized M3 mounting fits common multicopter frames from various manufacturers.\u003c\/p\u003e \u003cp\u003eThe motor requires a compatible ESC for operation as well as propellers of a suitable size and pitch. A 6S power supply is required. When flying in damp environments, take care to prevent water ingress, as the motor is not sealed against moisture.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eRotating propellers can cause serious injuries. Never operate the motor without secure mounting, and keep the area around the propellers clear during operation. This motor is intended exclusively for building model drones and prototypes, not for use in aircraft involved in air traffic or near people without appropriate protective equipment. If anything is unclear, consult a qualified electrician before operation.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997721796957,"sku":"F23108594","price":61.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/original-emax-mt4114-brushless-motor-340kv-6s-222v-quad-hexa-copter-cw-version-funduino-3645808.jpg?v=1791497343"},{"product_id":"original-emax-mt4114-brushless-motor-340kv-6s-22-2v-quad-hexa-copter-ccw-version","title":"Emax MT4114 Brushless Motor - 340 kV, 6S 22.2 V, CCW","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushless electric motor for multicopters and drones\u003c\/li\u003e \u003cli\u003eKV rating of 340, designed for 6-cell lithium polymer batteries (22.2 V)\u003c\/li\u003e \u003cli\u003eThrust of up to 2.2 kg with the optimum propeller\u003c\/li\u003e \u003cli\u003eWeight: 40 g, compact design for lightweight aircraft\u003c\/li\u003e \u003cli\u003eThree-phase control via an electronic speed controller (ESC)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis 340 KV brushless electric motor is suitable for multicopters weighing approximately 1 to 2 kg. The KV rating determines how many revolutions per minute the motor reaches per volt of supply voltage. With a 6-cell lithium polymer power supply providing a nominal 22.2 V, it achieves high speeds that are converted into thrust by a lightweight propeller.\u003c\/p\u003e \u003cp\u003eThe motor requires an electronic speed controller to supply the three-phase windings with the correct frequency. The appropriate ESC is matched to the battery voltage and also handles control during flight. The motor itself is maintenance-free and wear-free because it does not use carbon brushes.\u003c\/p\u003e \u003cp\u003eRacing drones and agile quadcopters benefit from the high power and low weight. This motor type is also used in custom builds for aerial photography when the payload needs to remain limited. A suitable propeller matched to the motor's speed class is required for operation.\u003c\/p\u003e \u003cp\u003eA compatible ESC module and a 6-cell lithium polymer battery are required. Correctly matching the motor, speed controller, and propeller determines efficiency and flight time. The motor is not designed for continuous operation on a test stand without propeller load.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eHigh-speed motors with rotating parts pose a risk of crushing and cutting injuries. The motor is intended exclusively for use in the construction of drones, multicopters, and test setups. When working with lithium polymer batteries, follow the battery manufacturer's safety instructions, particularly regarding storage conditions and monitoring during charging.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997763936605,"sku":"F23108410","price":61.52,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/original-emax-mt4114-brushless-motor-340kv-6s-222v-quad-hexa-copter-ccw-version-funduino-7914050.png?v=1791497347"},{"product_id":"3-6v-tt-getriebemotor-1-90-ubersetzung-vollmetallgetriebe-einzelachse-200rpm","title":"TT gear motor - 3-6 V, 1:90, 200 rpm, all-metal gearbox, single shaft","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC motor with metal gearbox for an operating voltage of 3 to 6 volts\u003c\/li\u003e \u003cli\u003e1:90 gear reduction for high torque at low speed\u003c\/li\u003e \u003cli\u003eTT motor type with axles spaced 3 mm apart\u003c\/li\u003e \u003cli\u003eWide voltage tolerance enables flexible power supply\u003c\/li\u003e \u003cli\u003eAll-metal gearbox for continuous use without wear problems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis gear motor combines a simple DC drive with a metal gearbox and can be operated between 3 and 6 volts. The 1:90 gear reduction greatly reduces the motor speed and significantly increases the available torque, allowing the motor to move loads that an unregulated motor could not handle.\u003c\/p\u003e \u003cp\u003eThe metal gearbox wears considerably more slowly during extended use than plastic gearboxes and withstands higher loads. If you need moderate speed with high torque, for example to drive a robot or operate a rack-and-pinion extension mechanism, this motor is a reliable solution. The TT design with standardized axle spacing fits common wheels and gearbox flanges.\u003c\/p\u003e \u003cp\u003eThe wide voltage range from 3 to 6 volts allows operation with either two alkaline batteries (approx. 3 volts) or three cells or a laboratory power supply (up to 6 volts), without requiring additional regulators. Speed control or smoother acceleration without jerking requires a PWM speed controller with the corresponding current consumption.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis motor is intended exclusively for building prototypes and for testing and development purposes. Uncontrolled spinning can cause injuries if rotating parts are exposed or could become caught in long hair; protective covers are required. When powering the motor from the mains, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V TT gear motor - 1:90 gear reduction, all-metal gearbox, single axle, 200 rpm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997807223133,"sku":"F23109195","price":4.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-tt-getriebemotor-190-uebersetzung-vollmetallgetriebe-einzelachse-200rpm-funduino-7378443.jpg?v=1791493511"},{"product_id":"fs90r-360-micro-servo-getriebemotor","title":"FS90R Micro Servo 360° - continuous rotation, 4.8-6 V, 60 RPM","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eServo motor with 360-degree rotation and slip-ring contacts for continuous rotation\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 V, speed approximately 60 revolutions per minute at 5 V\u003c\/li\u003e \u003cli\u003eTorque approximately 1.3 newton meters\u003c\/li\u003e \u003cli\u003ePWM control via standard servo signal, one control signal per motor\u003c\/li\u003e \u003cli\u003eCompact dimensions for space-constrained installations in small robots or mobile models\u003c\/li\u003e \u003cli\u003eUse of common development environments, such as Arduino or MicroPython\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis micro servo with an unlimited range of rotation replaces the angle control of a standard servo with continuous rotation. The slip-ring system enables full 360-degree rotations without mechanical stops. Control is provided via PWM signals using the standard servo protocol, as output by any microcontroller board or conventional servo controller.\u003c\/p\u003e \u003cp\u003eAn operating voltage between 4.8 and 6 volts determines the possible applications. The module connects directly to 5 V logic pins on standard boards; for 3.3 V systems, an external power supply or level shifter is required. The maximum speed of approximately 60 revolutions per minute at optimal voltage and light load enables smooth, controllable movements. The torque of approximately 1.3 newton meters is sufficient for light loads of up to around 200 grams in typical applications.\u003c\/p\u003e \u003cp\u003eApplications include robotics, mobile robots with drive wheels, camera mounts with continuously adjustable panning, and object sorters with rotating mechanisms. Smaller applications, such as miniature gear systems in model kits, also benefit from the compact dimensions.\u003c\/p\u003e \u003cp\u003eThe motor requires an external power supply that operates independently of the control signal. An average 5 V power supply or a battery-powered supply with sufficient capacity is necessary. Loads over approximately 200 grams result in reduced speed and excessive power consumption.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe slip-ring system may generate heat under load; avoid operating at excessively low voltages or with continuous peak loads. The module is not intended for installation in household electrical circuits and is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by a qualified electrician; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x FS90R 360° Micro Servo - Gear Motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997812334941,"sku":"F23108874","price":9.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/fs90r-360-micro-servo-getriebemotor-funduino-9808703.jpg?v=1791493524"},{"product_id":"servomotor-typ-es08maii-es08ma2-vgl-mit-emax","title":"ES08MAII servo motor - 1.8 kg·cm, 3.3-6 V, 9 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature servo motor with plastic gears for control tasks in model making and robotics projects\u003c\/li\u003e \u003cli\u003eTorque 1.8 kg·cm at 4.8 V\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 to 6 V\u003c\/li\u003e \u003cli\u003eTravel time 60° in approximately 0.1 seconds\u003c\/li\u003e \u003cli\u003eControl via PWM signal (1000 to 2000 microseconds)\u003c\/li\u003e \u003cli\u003eDimensions 23 * 12 * 29 mm, weight approximately 9 grams\u003c\/li\u003e \u003cli\u003ePlastic gears and metal shaft, standard 3-pin connector\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis servo motor controls movement sequences in compact applications where space is limited while fast, precise positioning commands are required. A plastic gear train converts the motor's power into torque, while the internal electronics receive PWM signals and independently regulate the position.\u003c\/p\u003e \u003cp\u003eThe device operates across a voltage range of 3.3 to 6 V and can therefore be connected directly to microcontroller boards without additional level shifting. The PWM pulse length between 1000 and 2000 microseconds sets the desired angular position; at 1500 microseconds, the shaft is in the center position. A single servo requires only three wires: power, ground, and control signal.\u003c\/p\u003e \u003cp\u003eApplications range from model aircraft and small robot gripper arms to camera pan mechanisms in surveillance setups. The low weight of approximately 9 grams and compact external dimensions also enable assemblies with multiple units. The available torque of 1.8 kg·cm is fully sufficient for propeller adjustment, steering servo functions, or opening and closing mechanisms.\u003c\/p\u003e \u003cp\u003eA power source capable of supplying the required current peaks is necessary, typically a charged battery pack or a regulated power supply rated at approximately 1 A or more. PWM control requires an output with variable pulse duration, which common microcontrollers provide. The servo reaches approximately 60 degrees in 0.1 seconds; this design is not intended for precision applications requiring accuracy to tenths of a degree.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eMoving parts can cause pinching or apply torque without warning; keep hands and long hair away during operation. This device is intended exclusively for prototypes, model making, and development purposes and is not suitable for installation in household systems.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x servo motor type ES08MAII, ES08MA2, comparable to EMAX\u003c\/li\u003e \u003cli\u003e4x control horns \u0026amp; mounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997814530397,"sku":"F23106821","price":7.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servomotor-typ-es08maii-es08ma2-vgl-mit-emax-funduino-2050997.png?v=1791494643"},{"product_id":"elektromotor-rs140-3v-6v-dc","title":"RS140 electric motor - 3-6 V DC, 8000 rpm, shaft Ø 2 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC motor for operation at either 3 V or 6 V\u003c\/li\u003e \u003cli\u003eSpeed of up to approximately 8000 rpm at 6 V, reduced at 3 V\u003c\/li\u003e \u003cli\u003eOutput shaft with a diameter of 2 mm\u003c\/li\u003e \u003cli\u003eMaximum current consumption of 0.5 A\u003c\/li\u003e \u003cli\u003eCompact design with a length of 28 mm\u003c\/li\u003e \u003cli\u003eTwo connection wires for direct power supply\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis DC motor operates with a voltage of 3 or 6 volts and is powered directly via wire connections. Depending on the operating voltage, the speed varies from approximately 4000 revolutions per minute at 3 volts to just under 8000 at 6 volts. The higher voltage accelerates the motor without mechanical adjustment, but also allows it to be braked more quickly via a controller if required.\u003c\/p\u003e \u003cp\u003eThe motor draws a maximum of 0.5 amperes and is therefore suitable for battery and rechargeable battery power supplies as well as controller outputs with sufficient current capacity. The 2 mm output shaft fits common gearboxes and small gears. A reduction gearbox is required for higher torque or lower speeds.\u003c\/p\u003e \u003cp\u003eIn robot construction, the motor can drive small wheel or track mechanisms, for example. In model-making projects, it can be used to operate levers, rollers, or conveyor belts. It is also used in adjustable devices such as fans or mixers. For stationary applications with continuous loads, a power supply with sufficient capacity should be available.\u003c\/p\u003e \u003cp\u003eTo protect the power source and distribute power, the motor requires at least a simple on\/off switch or a PWM controller for variable-speed applications. To make it rotate, the supply voltage must be applied directly; separate control as used with stepper motors is not required. Reversing the polarity of the connection wires makes the motor rotate in the opposite direction.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eBefore connecting the motor, check that the operating voltage and available power supply are compatible. The motor is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for installation in the household mains circuit. If you have questions about integrating it into larger systems or about safe power supply, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRS140 DC motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997822820701,"sku":"F23108319","price":2.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/elektromotor-rs140-3v-6v-dc-funduino-6577243.jpg?v=1791494679"},{"product_id":"velox-t-motor-kv2550-v2-v2207-4s-brushless-motor-fur-fpv-racing-eisblau","title":"T-Motor Velox V2207 V2 brushless motor - 2550 KV, 4S, ice blue","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushless electric motor for lightweight model aircraft and multicopters\u003c\/li\u003e \u003cli\u003eRated voltage 14.8 V (4S lithium-polymer battery)\u003c\/li\u003e \u003cli\u003eSpeed constant 2550 KV, maximum speed approximately 37,700 revolutions per minute\u003c\/li\u003e \u003cli\u003e2207 design with a stator weight of approximately 28 grams\u003c\/li\u003e \u003cli\u003eConnected via three windings to an electronic speed controller\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis 2207 brushless motor is designed to power lightweight model aircraft. The rated voltage of 14.8 V corresponds to a four-cell lithium-polymer battery, as commonly used in multicopters and drones. With a speed constant of 2550 KV, the motor reaches approximately 37,700 revolutions per minute at this voltage, making it suitable for propeller-driven systems with small to medium-sized rotors.\u003c\/p\u003e \u003cp\u003eThe motor's winding design requires an electronic speed controller (ESC) that generates the three-phase alternating voltage and regulates the speed. The motor does not require a separate controller in the conventional sense; instead, it is connected directly to the ESC board via the three connections. Mechanically, the motor has compact dimensions and weighs approximately 28 grams, which is crucial for flight applications.\u003c\/p\u003e \u003cp\u003eTypical applications include building racing drones, photography multicopters, and experimental model aircraft. In lightweight test platforms with a suitably sized battery and propeller, the system achieves good climb performance and responsiveness.\u003c\/p\u003e \u003cp\u003eA suitable lithium-polymer battery system with at least four cells, a compatible electronic speed controller with an appropriate current rating, and a propeller selected to match the motor's weight are required. The motor is supplied without a controller, battery, or mounting hardware.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis motor is not intended for connection to the household power supply and is intended solely for assembly, testing, and development purposes. Work on or in the immediate vicinity of the power supply must be performed by qualified electricians; if in doubt, consult a qualified electrician before commissioning. The motor reaches high speeds. During operation, keep hands, hair, and loose objects away from the propeller.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Velox T-Motor KV2550 V2 V2207, 4S Brushless Motor, for FPV racing drones - Ice Blue\u003c\/li\u003e \u003cli\u003eincl. screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825081693,"sku":"F23109281","price":27.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/velox-t-motor-kv2550-v2-v2207-4s-brushless-motor-fuer-fpv-racing-eisblau-funduino-8019701.png?v=1791497777"},{"product_id":"rad-felge-mit-gummilaufflache-fur-360-servos","title":"Wheel for 360° servo - rim with rubber tread, Ø 60 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRubber tread on a plastic rim, compatible with 360-degree servos\u003c\/li\u003e \u003cli\u003eDiameter 60 mm, width 9 mm\u003c\/li\u003e \u003cli\u003eEnhanced traction through a textured surface\u003c\/li\u003e \u003cli\u003eFor use in mobile robots and powered chassis\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe wheel with a rubber tread mounts onto servos that rotate continuously. The 60 mm diameter provides good traction for compact chassis. The textured rubber surface generates sufficient friction for reliable propulsion on various surfaces.\u003c\/p\u003e \u003cp\u003eWhen directly coupled to a 360-degree servo, the wheel requires no additional mounting beyond the standard servo interface. The 9 mm width fits common servo output shafts and allows for easy push-fitting or screw mounting. Whether used in a rolling robot or a smaller wheel-driven vehicle, this wheel provides the servo with direct power transmission to the driving surface.\u003c\/p\u003e \u003cp\u003eBuilding projects with multiple 360-degree servos is accelerated by the ready-made tread; an expensive gearbox is unnecessary, and the wheel reduces the load on the motor with direct surface grip. However, the limitations are clear, as very high torque, bumps, and lateral compression can damage the rubber structure. On level, moderate surfaces with typical robot weights, the wheel operates reliably.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for building prototypes and robot projects. Working on servo motors and their mounting requires care during mechanical assembly. Before commissioning, ensure that the wheel is securely attached and that there are no sharp edges or holes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1x wheel \/ rim with rubber tread for 360° servos\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825638749,"sku":"F23105825","price":1.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/rad-felge-mit-gummilaufflaeche-fuer-360-servos-funduino-9529797.png?v=1791493596"},{"product_id":"nema17-schrittmotor-mit-zuleitung","title":"NEMA17 stepper motor - 0.4 Nm, 12 V, with lead wire","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eStepper motor in the NEMA17 standard with a four-wire cable\u003c\/li\u003e \u003cli\u003eProvides torque of up to 0.4 Nm, operating voltage 12 V\u003c\/li\u003e \u003cli\u003eTwo coil windings with a rated current of 1.5 A each\u003c\/li\u003e \u003cli\u003eStep angle of 1.8 degrees per pulse\u003c\/li\u003e \u003cli\u003eCable with connector for direct connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe NEMA17 stepper motor provides precise positioning in applications where neither sensors nor control loops are required. The motor rotates in defined steps of 1.8 degrees, making it easy to calculate the required number of pulses from the desired position. With a torque of 0.4 Nm and an operating voltage of 12 V, the device is suitable for light to medium loads in prototyping applications.\u003c\/p\u003e \u003cp\u003eIt is controlled via a stepper motor driver that supplies the four connections with timed signal sequences, thereby selectively energizing the two coil windings. In addition to the 12 V supply for the motor, the driver itself requires a separate logic input, for example from a microcontroller board, to control the direction and step frequency.\u003c\/p\u003e \u003cp\u003eTypical applications include XY plotters, in which two motors position the axes, rotary components in measuring instruments or calibration devices, simple robotics projects with linear motion axes, and automated testing fixtures for laboratory use. For rapid movements of more than 1000 steps per second, the torque should be checked through load testing, as the holding force decreases at higher frequencies.\u003c\/p\u003e \u003cp\u003eA suitable stepper motor driver, a power supply with at least 12 V and sufficient current capacity, and a microcontroller board with digital outputs are required. Mechanical mounts and couplings for connecting the motor to a load or axis are not included.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor must not be connected directly to a household power outlet or power grid and is intended exclusively for prototyping, testing, and development purposes. Ensure that the coils are assigned correctly according to the wiring diagram of the driver being used; incorrect wiring can lead to motion failures or damage. If you are unsure about the operating voltage, stepper motor driver, or safety aspects, consult a qualified electrician before operation.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eincluded.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997836190045,"sku":"F23106017","price":14.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/nema17-schrittmotor-mit-zuleitung-funduino-4403930.jpg?v=1791494048"},{"product_id":"hc-020k-schrittzahler-fur-motoren-wheel-encoder","title":"HC-020K encoder - optical speed sensor, 2 pieces, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eIncremental encoder for detecting rotations on motor shafts\u003c\/li\u003e \u003cli\u003eDetects up to 20 pulses per revolution\u003c\/li\u003e \u003cli\u003eDigital output on two channels (A and B)\u003c\/li\u003e \u003cli\u003eOperating voltage 5 V\u003c\/li\u003e \u003cli\u003eIncludes mounting ring and adapter sleeves for various shaft diameters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eAn incremental encoder enables precise measurement of rotational speed and direction on motor shafts. The module detects rotations through optical sensing and outputs the detected pulses on two outputs with different phase positions. This makes it possible not only to calculate the rotational speed but also to determine the direction in which the shaft is rotating.\u003c\/p\u003e \u003cp\u003eThe two outputs enable a resolution of up to 20 pulses per revolution. This level of accuracy allows even small movements to be detected and processed in control applications. The 5 V operating voltage enables direct connection to common microcontroller boards and motor controllers without additional level shifting.\u003c\/p\u003e \u003cp\u003eTypical applications include automated guided vehicles that determine their position using wheel pulses, or robots that control arm movements based on the angle of rotation. The module is also suitable for speed controllers for DC motors. The included adapter sleeves fit various shaft diameters; non-standard shafts require a customized mounting solution.\u003c\/p\u003e \u003cp\u003eThe module requires a stable 5 V power supply and a microcontroller with at least two digital inputs for processing the pulses. An optocoupler or a Schmitt trigger input improves noise immunity but is not strictly required.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Improper attachment to rotating parts may cause damage to the module or injury; the mounting must be carefully checked before commissioning. If you have questions about integrating it into control applications, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x HC-020K step counter for motors - Wheel Encoder\u003c\/li\u003e \u003cli\u003econsisting of: 1x slotted disc, 1x Wheel Encoder and cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997838844253,"sku":"F23107589","price":3.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hc-020k-schrittzaehler-fuer-motoren-wheel-encoder-funduino-2280708.png?v=1791494055"},{"product_id":"kamerahalterung-gimbal-mit-zwei-achsen-fur-2x-mg90-servo","title":"Gimbal camera mount - 2 axes for 2x MG90 servo, up to 500 g","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTwo-axis gimbal for stabilizing cameras on drones or mobile robots\u003c\/li\u003e \u003cli\u003eLoad capacity of up to 500 g, suitable for compact and lightweight action cameras\u003c\/li\u003e \u003cli\u003eControl via two separate servo motors (MG9)\u003c\/li\u003e \u003cli\u003ePan range: tilt 90 degrees, yaw 180 degrees\u003c\/li\u003e \u003cli\u003eMounting via quick-release plate or adhesive mounting\u003c\/li\u003e \u003cli\u003ePlastic construction with integrated ball bearings\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA two-axis gimbal stabilizes cameras using two independently controlled servo motors, removing camera shake during flight or compensating for movements of the carrier platform. The two MG9 motors enable panning movements in tilt and yaw, while a third degree of freedom (roll) remains mechanically fixed. The mount is designed for cameras weighing up to approximately 500 grams.\u003c\/p\u003e \u003cp\u003eThe tilt range covers 90 degrees, while the yaw range reaches 180 degrees. These axis ranges provide the framework for scenarios such as smooth pans over a person being tracked, stable overhead shots while the quadcopter rotates, or gentle camera movements on ground-based platforms. The faster the servos are driven and the more intense the system's base movement, the more the gimbal must compensate through counter-movement.\u003c\/p\u003e \u003cp\u003eTo operate it, two servo control channels are required on the flight controller or robot board, typically using PWM signals (pulse-width modulation). The camera is mounted using a quick-release plate or adhesive mounting; for heavier setups with greater torque, a secure mounting and balancing are recommended. Before operation, the gimbal should be set to the neutral position so that the servos do not move to their end positions while uncalibrated.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eWhen wiring and commissioning the device, the servo motors must not be driven against their mechanical end positions in order to prevent damage. The gimbal is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x camera mount \/ two-axis gimbal\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997840154973,"sku":"F23106409","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kamerahalterung-gimbal-mit-zwei-achsen-fuer-2x-mg90-servo-funduino-5301107.jpg?v=1791493648"},{"product_id":"elektromotor-rs180-mit-beidseitiger-welle-und-1xschnecke","title":"RS180 electric motor - dual-sided shaft, 12 V, with worm gear","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric motor with a shaft on both sides for drives with gearboxes mounted on both sides\u003c\/li\u003e \u003cli\u003eRated speed 8200 rpm\u003c\/li\u003e \u003cli\u003eRated power 25 W\u003c\/li\u003e \u003cli\u003ePower supply 12 V DC\u003c\/li\u003e \u003cli\u003eScrew terminal connection for direct wiring\u003c\/li\u003e \u003cli\u003eShaft diameter on both sides 3 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe electric motor with a shaft on both sides provides drive output on both sides simultaneously. This enables, for example, the mechanical coupling of both shaft ends or the installation of different gearboxes and mechanisms without having to build additional shaft transitions.\u003c\/p\u003e \u003cp\u003eThe motor operates at 12 V DC and delivers 25 W of power at a rated speed of 8200 rpm. Current consumption depends on the mechanical load and is significantly lower when idling than under load. The screw terminals enable a secure, permanent connection to power cables without plugs.\u003c\/p\u003e \u003cp\u003eApplications include robotic grippers in which one gearbox drives the left jaw and another on the opposite side drives the right jaw, as well as dual-roller drives in conveyor systems. This shaft configuration is also practical for mixers or driven rollers on two levels.\u003c\/p\u003e \u003cp\u003eA suitable 12 V DC power supply is required for operation. The power supply should significantly exceed the expected current consumption under load. The motor and power supply should be positioned close to each other to keep voltage drops in the power cable low.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household mains circuits. The rotating shaft poses a risk of injury; body parts and loose clothing must be kept away during operation. If you have questions about the power supply, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRS180 electric motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997854245213,"sku":"F23108316","price":1.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/elektromotor-rs180-mit-beidseitiger-welle-und-1xschnecke-funduino-3041883.png?v=1791493211"},{"product_id":"brushless-motor-a2212-13t-1000kv","title":"A2212 brushless motor - 1000 KV, 13T, 2-3S LiPo","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushless motor with 1000 KV (revolutions per volt), designed for 2–3-cell lithium-polymer batteries\u003c\/li\u003e \u003cli\u003e13-tooth pinion, directly compatible with standard motor shafts\u003c\/li\u003e \u003cli\u003eMaximum current draw of approximately 30 A under load\u003c\/li\u003e \u003cli\u003eOutrunner design with optimized air gap\u003c\/li\u003e \u003cli\u003eWeight of approximately 45 grams, compact design for aircraft models and multicopters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe 1000 KV brushless motor serves as a drive unit for unmanned aerial vehicles and fast land vehicles. Its rated speed of 1000 revolutions per volt means that it reaches approximately 11,000 revolutions per minute when connected to an 11-volt battery, making it ideal for propellers in the medium power range and for vehicle drives.\u003c\/p\u003e \u003cp\u003eThe motor operates according to the principle of electronically commutated rotation: a controller alternately supplies current to the windings, creating magnetic fields that drive the rotor's permanent magnets. The maximum current draw of approximately 30 amperes requires a suitable controller with the corresponding current rating. The 13-tooth pinion is mounted onto the standard motor shaft and fits all common gear sets for model vehicles.\u003c\/p\u003e \u003cp\u003eApplications range from racing drones and FPV multicopters to medium-sized remote-controlled aircraft models. This motor type also provides consistent performance in electric racing cars. With propeller diameters between 8 and 12 inches or in vehicle gear systems operating above the 3S battery voltage (11.1 volts), the motor reaches its optimal operating range.\u003c\/p\u003e \u003cp\u003eThe outrunner design uses the entire winding for the air gap and cooling effect; bearing wear therefore occurs significantly later than in inrunner motors. An electronic controller is required for operation and handles current commutation. The motor is connected to the controller via three phases, allowing speed adjustment via a PWM signal from a receiver or flight controller. Operating voltages between 7.4 and 14.8 volts (2S to 4S lithium-polymer) are supported; higher voltages may damage the windings.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis motor generates considerable centrifugal forces during operation and can cause lacerations. Propellers and pinion attachments must be securely fastened and must not be loose. The motor is intended exclusively for assembling aircraft models, vehicle prototypes, and test setups, not for industrial applications or continuous operation in a household environment. Overloads or damage may cause winding fires; if you are unsure about safe operation, consult a qualified professional with experience in model aviation or electric mobility technology.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997857816925,"sku":"F23108538","price":8.33,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/brushless-motor-a2212-13t-1000kv-funduino-1718116.png?v=1791493225"},{"product_id":"nema17-schrittmotor-mit-zuleitung-17hs19-2004s1","title":"NEMA17 stepper motor 17HS19-2004S1 - 0.48 Nm, 1.68 A, bipolar","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBipolar stepper motor with NEMA17 housing and 0.4 m connection cable\u003c\/li\u003e \u003cli\u003eHolding torque 0.48 Nm, maximum speed approximately 3000 min⁻¹ in full-step mode\u003c\/li\u003e \u003cli\u003eCoil impedance 2.8 Ω per phase, rated current 1.68 A per phase\u003c\/li\u003e \u003cli\u003eFour connection wires for bipolar control\u003c\/li\u003e \u003cli\u003eSide length 42 mm, length without shaft 47.4 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe NEMA17 stepper motor is driven via discrete coils and is suitable for precise positioning tasks in motion control applications such as robotics, 3D printing, or laboratory automation. The four connection wires enable bipolar operation, in which both coil phases are alternately energized.\u003c\/p\u003e \u003cp\u003eThe holding torque of 0.48 Nm is sufficient for light to medium loads, for example to drive print heads or position sensors. In full-step operation, the motor reaches up to 3000 revolutions per minute. Gearboxes are used for higher torque; microstepping can be considered for finer resolution, but it reduces the effective speed.\u003c\/p\u003e \u003cp\u003eControl requires a bipolar stepper motor driver that switches the coil windings against the supply voltage. The driver must be rated for a phase current of at least 1.68 A. The coil impedance of 2.8 Ω, together with the supply voltage, determines the maximum achievable current and therefore the available torque.\u003c\/p\u003e \u003cp\u003eThe motor is supplied with a 0.4 m connection cable; longer connections to the driver are possible, but require thicker wires to limit voltage drops. A gearbox, gear, or coupling to the target gearbox is not included. The motor is operated from DC voltage sources between approximately 12 V and 24 V; higher voltages enable faster step sequences but also place greater demands on the driver.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe device is not designed for operation in household electrical installations and is intended exclusively for building prototypes and for testing and development purposes. The power supply must be provided from outside the household electrical circuit. Consult qualified electricians before commissioning if you have questions about voltage selection or connection to the mains.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* NEMA17 stepper motor with lead wire - 17HS19-2004S1\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997858799965,"sku":"F23106828","price":17.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/nema17-schrittmotor-mit-zuleitung-17hs19-2004s1-funduino-3900818.png?v=1791494215"},{"product_id":"servo-tester-esc-checker-pwm-controller","title":"Servo tester - 3 modes for servo, ESC, and PWM, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUniversal tester for servo motors and electronic speed controllers (ESCs)\u003c\/li\u003e \u003cli\u003ePWM control with manual operation via potentiometer\u003c\/li\u003e \u003cli\u003eOperating voltage from 4.8 to 6.0 volts\u003c\/li\u003e \u003cli\u003eThree modes: servo testing, ESC checking, and PWM generation\u003c\/li\u003e \u003cli\u003eCompact, portable design with battery compartment\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis tester tests and controls servo motors and speed controllers directly, without a transmitter or receiver. The device generates standardized PWM signals that can be used to manually adjust servo positions and check ESC functions.\u003c\/p\u003e \u003cp\u003eThree modes enable different applications. In servo mode, the motor's control range is traversed using the potentiometer. ESC mode checks the direction of rotation and performance of speed controllers. In PWM generation mode, a freely adjustable test pulse format is specified. The operating voltage between 4.8 and 6.0 volts is suitable for most common servos and basic controllers; higher voltages require an additional power supply.\u003c\/p\u003e \u003cp\u003eThe device is suitable for troubleshooting in model aircraft, drones, and robot drives before installation in the system. In workshop use, it eliminates the need to fully equip a test setup, allowing servo failures to be checked in isolation. The device is particularly useful when tuning ESC parameters or testing replacement parts.\u003c\/p\u003e \u003cp\u003eFour AA batteries are required for operation; alternatively, an external power supply within the specified voltage range can be connected. The device is intended exclusively as a testing and diagnostic tool and is not designed for continuously driving loads.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis device is intended exclusively for testing and commissioning servo motors and electronic controllers in development and workshop environments. It is not suitable for integration into household electrical circuits or permanent operating equipment. When working on or near power supply systems, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x\u0026nbsp;Servo Tester \/ ESC Checker\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997864337757,"sku":"F23109082","price":3.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servo-tester-esc-checker-pwm-controller-funduino-8393354.jpg?v=1791493760"},{"product_id":"rs385-elektromotor-12v-36v","title":"RS385 electric motor - 12-36 V, 100 W, 12,000 rpm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushed DC motor for operating voltages from 12 V to 36 V\u003c\/li\u003e \u003cli\u003ePower: 100 W, maximum speed approximately 12,000 rpm\u003c\/li\u003e \u003cli\u003eM3 threaded holes for mounting, 6 mm shaft diameter\u003c\/li\u003e \u003cli\u003eField winding for high torque at low speeds\u003c\/li\u003e \u003cli\u003eSupplied without gearbox and power supply\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe RS385 is a brushed DC motor with a wide voltage range from 12 V to 36 V. It is suitable for drive applications where different operating voltages are possible or the final voltage has not yet been determined. The field winding enables high torque even at low speeds, making the motor particularly valuable for load-driven applications.\u003c\/p\u003e \u003cp\u003eThe motor requires a suitable power supply or battery with the desired voltage between 12 V and 36 V. Current consumption increases significantly with higher loads, so the power supply must be dimensioned accordingly. Depending on the voltage and load, the shaft speed of approximately 12,000 rpm maximum is usually considerably lower.\u003c\/p\u003e \u003cp\u003eTypical applications include driverless model vehicles, robot drives, electromechanical tools, or mobile platforms where the variable voltage range offers a design advantage. The motor can also be used to drive cable winches, pumps, or valves, provided that the available torque is sufficient.\u003c\/p\u003e \u003cp\u003eFor precise sizing, the operating voltage, expected load, and operating time must be determined in advance. The motor is supplied without a power supply, controller, or connection cables; these must be purchased separately. Mechanical mounting is carried out using the M3 threaded holes in the motor housing.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor is not intended for operation from the household mains supply. Reversing the polarity or using an incorrect voltage can damage the motor. Use is limited to prototyping, testing, and development purposes. Before commissioning, ensure that the power supply and circuit wiring comply with the motor specifications; if in doubt, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRS385 electric motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997867385181,"sku":"F23108266","price":2.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/rs385-elektromotor-12v-36v-funduino-9111568.png?v=1791494827"},{"product_id":"3-6v-tt-getriebemotor-1-90-ubersetzung-metallgetriebe-einzelachse","title":"TT Gear Motor - 3-6 V, 1:90, metal gears, single shaft","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGear motor for low-voltage DC power supply\u003c\/li\u003e \u003cli\u003eOperating voltage: 6 V DC\u003c\/li\u003e \u003cli\u003eOutput speed of approximately 90 rpm through metal gear reduction\u003c\/li\u003e \u003cli\u003eTT motor mount for robotic vehicles\u003c\/li\u003e \u003cli\u003eOperating current draw of approximately 150 mA at rated load\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe gear motor provides drive power for small robotic vehicles and mobile projects. The integrated metal gearbox reduces the motor's high rotational speed to approximately 90 rpm while increasing the available torque, which is necessary for safely transporting heavier loads.\u003c\/p\u003e \u003cp\u003eThe 6 V DC power supply allows direct operation from battery packs containing four AA cells or from power supply modules with a corresponding output level; an upstream motor controller (H-bridge) is required to change the direction of rotation or regulate the speed. The TT motor mount fits common vehicle platforms and saves time when assembling drive units.\u003c\/p\u003e \u003cp\u003ePossible applications include autonomous vehicles and robots on level ground, competitions such as line-following races, and user-controlled exploration vehicles that are intended to implement variable speeds or obstacle responses. The available power is insufficient for sloped terrain or significantly increased loads.\u003c\/p\u003e \u003cp\u003eA power supply is not included; sufficient power supply capacity must be ensured before commissioning, as the typical current draw reaches 150 mA under load. The motor also requires an H-bridge driver board to be controlled by digital signals from a microcontroller.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis motor is intended exclusively for building prototypes and for testing and development purposes and must not be connected to household electrical wiring. Power sources above 12 V pose a risk of burns and fire; the operating voltage must not exceed 6 V. If you are unsure about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V gear motor - 1:90 gear ratio\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997870858589,"sku":"F23105973","price":3.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-tt-getriebemotor-190-uebersetzung-metallgetriebe-einzelachse-funduino-1401275.png?v=1791493304"},{"product_id":"dc-motor-mit-getriebe-3-9v-hohes-drehmoment","title":"Gear Motor 3-9 V - 3 Nm torque, 60 rpm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC motor with reduction gearbox for torque of up to 3 Nm\u003c\/li\u003e \u003cli\u003eOperating voltage 9 V DC\u003c\/li\u003e \u003cli\u003eShaft diameter 6 mm\u003c\/li\u003e \u003cli\u003eOutput speed approximately 60 rpm\u003c\/li\u003e \u003cli\u003eCan be connected directly to a battery or power supply\u003c\/li\u003e \u003cli\u003ePlastic housing with mounting flange\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA DC motor with an integrated planetary gearbox converts the high speed of a standard DC motor into high torque at low speed. With a maximum output torque of 3 Nm and approximately 60 revolutions per minute, the drive module is suitable for tasks that require power rather than speed.\u003c\/p\u003e \u003cp\u003eThe motor operates directly from a 9 V power source. The reduction gearbox reduces the motor speed several times over, thereby converting the available power into torque. Current consumption briefly increases during startup; during continuous operation under load, current consumption decreases as the speed drops. The 6-millimeter output shaft accommodates couplings, wheels, or levers that can be attached directly or screwed on.\u003c\/p\u003e \u003cp\u003eThe high torque makes the module ideal for vehicle-like projects such as robots and model vehicles that need to drive up ramps or over obstacles. The torque is also sufficient for driving winches, lifting loads, or actuating mechanical levers. The module is less suitable for fast movements or time-critical control tasks where 60 rpm would be too slow.\u003c\/p\u003e \u003cp\u003eA 9 V DC power supply is required, such as four AA batteries or a suitable power adapter. Direct power supply via a simple switch contact or relay connection is possible; speed control additionally requires a PWM controller or motor driver IC. In high-quality model-building projects, a flyback diode connected in parallel with the motor is recommended to prevent voltage spikes when switching off.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe output shaft and moving gearbox components pose a crushing and shearing hazard; rotating parts may continue to move after shutdown. This module is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for use in building electrical circuits. For projects involving moving mechanisms or loads, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x DC motor with gearbox \/ 3-9V \/ High torque\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997878755677,"sku":"F23106507","price":6.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/dc-motor-mit-getriebe-3-9v-hohes-drehmoment-funduino-1003493.png?v=1791494859"},{"product_id":"halterung-aus-aluminum-fur-tt-getriebemotoren-mit-befestigungsmaterial-fur-chassis","title":"Motor Mount for TT Gear Motor - Aluminum, with mounting hardware","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAluminum bracket for TT gear motors with mounting holes\u003c\/li\u003e \u003cli\u003eBroad compatibility with standard TT motor dimensions\u003c\/li\u003e \u003cli\u003eRobust and rigid thanks to the aluminum profile\u003c\/li\u003e \u003cli\u003eTwo mounting options on robot frames or chassis\u003c\/li\u003e \u003cli\u003ePre-assembled mounting hardware\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis aluminum bracket securely mounts TT gear motors to robot chassis or frames. The profile provides high rigidity and prevents vibrations during operation that could otherwise cause sensor measurement errors or interfere with bearing detection.\u003c\/p\u003e \u003cp\u003eThe bracket uses standard mounting holes compatible with M3 or M4 screws, depending on the version. This makes it suitable for common robot platforms and allows it to be retrofitted into existing designs. The low weight of the aluminum does not put unnecessary strain on the available motor power.\u003c\/p\u003e \u003cp\u003eApplications include wheeled robots, walking machines, and automated guided vehicles, where reliable drive mounting is essential. Particularly in projects with multiple motors, the uniform bracket ensures symmetrical positioning and therefore precise driving behavior.\u003c\/p\u003e \u003cp\u003eAll that is needed for use is the TT motor itself and suitable mounting screws. A mounting drawing with hole spacing is included or can be found in the manufacturer's datasheet.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis bracket is intended exclusively for building prototypes and for testing and development purposes. Not suitable for operation on household mains circuits. There is a risk of crushing when working on rotating motor shafts; connect the motor terminals only after assembly is complete.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x metal bracket for TT gear motors with mounting hardware for chassis\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997879214429,"sku":"F23108183","price":1.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/halterung-aus-aluminum-fuer-tt-getriebemotoren-mit-befestigungsmaterial-fuer-chassis-funduino-3874614.png?v=1791493820"},{"product_id":"mikromotor-solarmotor-elektromotor-rf300ca-3v-6v-38cm-kabel","title":"RF300CA DC motor - 3-6 V, 10,000 rpm, 38 cm cable","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC motor with commutator contacts for low voltages\u003c\/li\u003e \u003cli\u003eSelectable operating voltage of 3 V or 6 V\u003c\/li\u003e \u003cli\u003eMaximum speed of approximately 10,000 rpm at 6 V\u003c\/li\u003e \u003cli\u003eCompact design with a 2 mm shaft diameter\u003c\/li\u003e \u003cli\u003eAlso suitable for solar operation with appropriate modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis DC motor is suitable for prototypes, model building and small drive applications in the low-voltage range. It is connected directly to 3 or 6 V DC and requires no additional electronics to start. The speed increases proportionally to the operating voltage.\u003c\/p\u003e \u003cp\u003eThe motor operates according to the principle of electromagnetic force in a magnetic field and produces continuous rotation. At 6 V, it reaches approximately 10,000 revolutions per minute; at 3 V, the speed is correspondingly lower. The small 2 mm-diameter shaft can be connected to various gears, discs or propellers. The current consumption during operation is in the low ampere range, so batteries or small solar modules are also sufficient as power sources.\u003c\/p\u003e \u003cp\u003eTypical applications include educational settings, robot kits with wind or water power experiments, and small vehicle-like models. It is particularly widely used in solar-powered aircraft and boats, where solar modules power the motor directly. This motor can also be used to drive fans or pumps for experiments.\u003c\/p\u003e \u003cp\u003eThe application determines which circuit supplies the motor; battery packs, power supplies or solar modules with the appropriate voltage output provide the required energy. Gears and wheels for the drive are not included and must be purchased separately if required.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis motor is not intended for installation in stationary electrical systems and is exclusively used for educational, experimental and development projects. During extended operation, the motor shaft may become warm due to friction. Work on or near existing power lines and electrical systems must be carried out by qualified electricians; anyone who is unsure about powering the motor should consult a qualified electrician before commissioning it.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003eincluded and must be purchased separately if required.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997927448925,"sku":"F23110307","price":2.04,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mikromotor-solarmotor-elektromotor-rf300ca-3v-6v-38cm-kabel-funduino-5952279.png?v=1791493346"},{"product_id":"emax-es08mdii-es08md2-servomotor","title":"EMAX ES08MDII servo motor - mini servo 180°, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMiniature servo motor for positioning tasks in robotics and model building\u003c\/li\u003e \u003cli\u003eRotation angle up to 180 degrees\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 6 volts\u003c\/li\u003e \u003cli\u003ePWM control via standard servo pulse width\u003c\/li\u003e \u003cli\u003eTorque of 1.9 Newton-centimeters at 5 volts\u003c\/li\u003e \u003cli\u003eFast response time of approximately 0.12 seconds\u003c\/li\u003e \u003cli\u003ePlastic gears with a metal wiper in the potentiometer\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA miniature servo motor precisely executes positioning commands by controlling position and movement in one plane. The motor automatically adjusts its position using feedback on its current position as soon as a PWM signal specifies the desired angular position. This eliminates the need for separate position monitoring by the user.\u003c\/p\u003e \u003cp\u003eThe motor operates at voltages between 4.8 and 6 volts, with the available torque increasing with the supply voltage. Control is provided via PWM signals in the standard servo format, which is directly available on many microcontroller boards and does not require additional driver electronics. A rotation angle of up to 180 degrees covers most positioning tasks.\u003c\/p\u003e \u003cp\u003eTypical applications include robotics, such as robot arms or grippers, where multiple servo motors coordinate movement sequences. In model aircraft, the motor controls ailerons or landing flaps. In camera pan-tilt mounts, it enables smooth panning movements. In prototypes for automation tasks, it performs fast-reacting switching movements, such as opening and closing valves.\u003c\/p\u003e \u003cp\u003eThe motor requires a separate power supply with sufficient current capacity, as microcontroller boards usually cannot provide enough power for operation and rapid movements. The plastic gears enable compact designs but are not intended for continuous loads involving extreme forces. Repairs to the motor itself are not предусмотрены.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo motor is intended exclusively for building prototypes and for testing and development purposes. Fast or powerful movements pose a risk of injury from moving parts; take protective measures where required by the application. A separate power supply with sufficient current capacity is required.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Emax ES08MD Digital Metall Gear Servo\u003c\/li\u003e \u003cli\u003e4x control horns \u0026amp; mounting screws\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997927842141,"sku":"F23106817","price":22.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/emax-es08mdii-es08md2-servomotor-funduino-1667994.png?v=1791493870"},{"product_id":"vibrationsmotor-3v-dc-10mm-x-3-3mm-30mm-kabel","title":"Vibration motor 3 V DC - Ø 10 x 3.3 mm, 30 mm cable","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSmall vibration motor for 3 V DC\u003c\/li\u003e \u003cli\u003eDiameter 10 mm, length 33 mm plus 30 mm connection cable\u003c\/li\u003e \u003cli\u003eGenerates vibrations through a rapidly rotating eccentric weight\u003c\/li\u003e \u003cli\u003eImmediate response to a switching command without delay\u003c\/li\u003e \u003cli\u003eDirect control via digital outputs of microcontroller boards\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA vibration motor with a 3 V supply voltage uses a rotating eccentric weight to generate powerful vibrations. The compact design fits into tight enclosures, while the 30 mm connection cable allows flexible placement in the assembly.\u003c\/p\u003e \u003cp\u003eThe motor requires only two connection wires and starts immediately when voltage is applied. The eccentric weight typically generates frequencies below 10 kHz. The vibration pattern is uniform and continues as long as current flows.\u003c\/p\u003e \u003cp\u003eTypical applications include haptic feedback in portable measuring devices or toy projects, vibration alarms in notification systems, and simple tactile signals for status messages from a robot arm. Objects being carried can also be set into controlled vibration to support material flow or shaking tasks.\u003c\/p\u003e \u003cp\u003eCurrent consumption is typically between 100 and 150 mA. Since the operating voltage is 3 V, this motor can be used directly with 3 V boards. On 5 V systems, a level shifter cannot be used without an additional power supply. The connection cable has no connectors; the connection is made by soldering or using terminal blocks.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis motor is intended exclusively for building prototypes and for testing and development purposes. Mechanical fixation is required to prevent uncontrolled movement of the motor itself. Work on or near electrical installations is reserved for qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3V DC vibration motor, 10x3.3mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997933347165,"sku":"F23107750","price":1.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/vibrationsmotor-3v-dc-10mm-x-33mm-30mm-kabel-funduino-2494997.png?v=1791494993"},{"product_id":"mini-vibrationsmotor-dc-3v-6v-20mm","title":"20 mm vibration motor - mini DC motor, 3-6 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMini DC motor with an eccentric brass wheel for generating vibrations\u003c\/li\u003e \u003cli\u003eOperating voltage: 3 to 6 V DC\u003c\/li\u003e \u003cli\u003eConnection via two solder tabs\u003c\/li\u003e \u003cli\u003eFoam casing for reducing noise and vibration\u003c\/li\u003e \u003cli\u003eDimensions: 20 mm length and 12 mm diameter (without foam)\u003c\/li\u003e \u003cli\u003eWeight: 9 g\u003c\/li\u003e \u003cli\u003eUse in small devices, toys, and model making\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe vibration motor is a DC motor with an offset brass wheel mounted on its shaft. This imbalance generates a vibration during rotation, which is transferred to the entire motor housing and its mounting.\u003c\/p\u003e \u003cp\u003eThe motor is connected via two solder tabs at the rear end of the housing and operated with a DC voltage between 3 and 6 V. Since it draws more current than a microcontroller output can provide, control requires a transistor or driver stage as an intermediate interface. The direction of rotation depends on the polarity, but this does not affect the vibration.\u003c\/p\u003e \u003cp\u003eThe foam casing dampens operating noise and reduces the transmission of vibrations to unwanted areas. With a length of 20 mm, a diameter of 12 mm (without foam), and a weight of just 9 g, the motor fits into tightly dimensioned housings. This makes it suitable for toys, model making, portable small devices, or massage devices - anywhere tactile feedback is required.\u003c\/p\u003e \u003cp\u003eAn external power source is required for the power supply, as is a driver circuit for control from the microcontroller.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor is not intended for installation in household electrical wiring. The module is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by a qualified electrician; if you are unsure, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Micro Vibration Motor DC 3V-6V - 20mm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997935214941,"sku":"F23107938","price":1.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mini-vibrationsmotor-dc-3v-6v-20mm-funduino-5005130.png?v=1791493399"},{"product_id":"vibrationsmotor","title":"3 V vibration motor - mini ERM, Ø 10 mm, with lead wires","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMini vibration motor with eccentric mass (ERM principle)\u003c\/li\u003e \u003cli\u003eProduces noticeable vibration with DC voltage\u003c\/li\u003e \u003cli\u003eOperating voltage 3 V DC, direct control without a driver IC\u003c\/li\u003e \u003cli\u003eConnection via two flexible, color-coded stranded wires\u003c\/li\u003e \u003cli\u003eMetal housing, flat design (approx. 10 mm diameter, 3.3 mm height)\u003c\/li\u003e \u003cli\u003eWeight approximately 1 g\u003c\/li\u003e \u003cli\u003eFor haptic feedback in mobile devices and controllers\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA vibration motor generates mechanical oscillations through a rotating eccentric mass. When DC voltage is applied, the eccentric mass rotates on the motor shaft and causes the entire housing to vibrate. This simple design (ERM, Eccentric Rotating Mass) does not require a special driver component for control; the motor operates directly from a DC power source.\u003c\/p\u003e \u003cp\u003eThe two connection wires are color-coded and enable straightforward polarity identification. When operating with a microcontroller, a switching transistor is usually connected upstream, as the controller outputs cannot supply the required motor current directly. For simple test setups, however, a 3 V DC battery or power supply connected between the two wires is sufficient.\u003c\/p\u003e \u003cp\u003eThe flat, disk-shaped design and minimal weight of approximately 1 g make this motor ideal for applications with limited space. Typical applications include vibration in mobile phones for calls and notifications, feedback effects in game controllers, or tactile feedback in wearable devices. The metal housing provides mechanical robustness and good heat dissipation.\u003c\/p\u003e \u003cp\u003eWhen integrating the motor into a project with a microcontroller, a separate power supply for the motor is also required in addition to a switching transistor if it requires more than 50 mA. The operating temperature range of -20 °C to 70 °C defines the limits for ambient conditions. During continuous operation, vibrations may become noticeable after extended running times.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis component is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Before commissioning, consult a qualified electrician when operating with power supplies above 12 V or in safety-critical applications. Observe the polarity of the connection wires.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x vibration motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997935411549,"sku":"F23106908","price":1.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/vibrationsmotor-funduino-4511873.png?v=1791495926"},{"product_id":"felge-rad-reifen-fur-n20-motoren-tt-getriebemotoren-kompatibel-mit-lego","title":"Wheel for N20 gear motor - 4 pieces, Ø 65 mm, 3 mm bore","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWheels with rims and tires for N20 gear motors\u003c\/li\u003e \u003cli\u003eDiameter 65 mm, width 26 mm\u003c\/li\u003e \u003cli\u003e3 mm bore for N20 motor shafts\u003c\/li\u003e \u003cli\u003ePlastic rim with rubber tire\u003c\/li\u003e \u003cli\u003eSet of 4 pieces per pack\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese wheels fit directly onto N20 gear motors and serve as drive wheels for mobile robots or vehicle-like projects. The plastic rims with vulcanized rubber tires provide sufficient traction on level surfaces.\u003c\/p\u003e \u003cp\u003eThe 3 mm bore fits the standardized motor shaft of the N20 motor. With a diameter of 65 mm, these wheels can reach speeds of up to approximately 0.5 m\/s with the usual N20 gear stages. The rubber tread enables power transmission through friction rather than slippery plastic.\u003c\/p\u003e \u003cp\u003eTypical applications include two-wheeled or four-wheeled robotic vehicles, such as obstacle detectors on a level tabletop or small transport carts in laboratories. The wheels work on laminate, wood, and concrete floors; traction decreases considerably on steeply inclined surfaces.\u003c\/p\u003e \u003cp\u003eEach pack contains four wheels. The motor shaft must be exposed or accessible via a short spindle; there is no locking groove or pin for transmitting torque, so the wheels are only suitable for applications where frictional grip is sufficient. Separate wheels are required for other drive concepts or different motor types.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eRemove sharp-edged or loose parts before use. These wheels are intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003e1x rim \/ wheel \/ tire for N20 motors, TT gear motors, compatible with Lego\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997938622813,"sku":"F23107387","price":1.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/felge-rad-reifen-fuer-n20-motoren-tt-getriebemotoren-kompatibel-mit-lego-funduino-5092718.png?v=1791495009"},{"product_id":"6v-dc-motor-rf-500-12560","title":"RF-500-12560 DC motor - 6 V, 2100 rpm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eBrushed DC motor for a 6 V rated voltage\u003c\/li\u003e \u003cli\u003eReaches up to 2100 revolutions per minute at no load\u003c\/li\u003e \u003cli\u003eMetal housing, 32.20 mm diameter, 33.35 mm height\u003c\/li\u003e \u003cli\u003e2 mm diameter drive shaft with an 8.7 mm usable length\u003c\/li\u003e \u003cli\u003eConnection via two solder tabs; the direction of rotation can be reversed by reversing the polarity\u003c\/li\u003e \u003cli\u003eOperating voltage range from 1.5 V to 12 V\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis DC motor with a metal housing directly converts electrical energy into rotational motion. The brushed design enables a simple setup without integrated control electronics. The current and direction of rotation depend solely on the voltage applied to the two solder tabs; reversing the polarity reverses the direction of rotation.\u003c\/p\u003e \u003cp\u003eThe motor is operated with a DC voltage between 1.5 V and 12 V; the rated voltage is 6 V. For use with a microcontroller, a driver circuit such as a transistor or an H-bridge is required, as the motor requires more current than a digital output can provide directly.\u003c\/p\u003e \u003cp\u003eThe compact size and simple connection make this motor suitable for small mechanical assemblies. It is frequently used in model-making projects, simple drives, and technical education. The 8.7 mm-long drive shaft accommodates gears, rollers, or propellers.\u003c\/p\u003e \u003cp\u003eA power supply of at least 1.5 V and a driver circuit for control by microcontrollers are required. The solder tabs must be connected to the power supply wires.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis motor is intended exclusively for building prototypes and for testing and development purposes. Direct power supply from the household electrical installation is prohibited. When working near electrical installations, consult a qualified electrician, especially if anything is unclear before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 6V DC Motor RF-500-12560\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997945241949,"sku":"F23107092","price":2.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/6v-dc-motor-rf-500-12560-funduino-6119847.png?v=1791496266"},{"product_id":"3-6v-getriebemotor-1-120-ubersetzung-einfache-achse","title":"Geared motor 1:120 - 3-6 V, single shaft","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGeared motor with 1:120 reduction\u003c\/li\u003e \u003cli\u003e6 V DC operating voltage\u003c\/li\u003e \u003cli\u003eSingle shaft for axle coupling\u003c\/li\u003e \u003cli\u003eLow idle current consumption\u003c\/li\u003e \u003cli\u003eSuitable for mobile robots and mechanical drive applications\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis geared motor with a 1:120 reduction converts high speeds into high torque. The gearbox reduces the motor's output speed by a factor of 120, increasing the available force and reducing power consumption under a constant load. The single shaft allows direct connection using standard couplings or pinions.\u003c\/p\u003e \u003cp\u003eThe 6 V operating voltage makes this unit a standard solution for battery-powered systems, such as mobile robots or vehicle-like models. The motor runs smoothly across the entire voltage range; speed and torque change with the applied voltage. This enables variable speed control using pulse-width modulation (PWM).\u003c\/p\u003e \u003cp\u003eIn model making, the reduction ratio is ideal for wiper or conveyor drives where throughput and endurance at moderate speeds are important. Robotic vehicles achieve smooth cornering and stable movements without additional reduction.\u003c\/p\u003e \u003cp\u003eThe motor draws its power directly from battery packs or power supply modules; external control such as a motor driver is not strictly required, but is necessary for PWM speed control. For continuous operation, the thermal load should be monitored, as the motor heats up during extended operation under load.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor may only be operated with direct current up to 6 V. The product is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Work on the power supply, or any work required when there is uncertainty about safe commissioning, must be carried out by a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V geared motor - 1:120 reduction, single shaft\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997945635165,"sku":"F23109006","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-getriebemotor-1120-uebersetzung-einfache-achse-funduino-5268879.png?v=1791496269"},{"product_id":"hc-020k-schrittzahler-fur-motoren-wheel-encoder-1","title":"HC-020K encoder - optical speed sensor, 2 pieces, 5 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eOptical encoder for detecting motor speed and position\u003c\/li\u003e \u003cli\u003eSlotted optical switch principle with code disc, generating digital pulses\u003c\/li\u003e \u003cli\u003eConnection via three-pin header (VCC, GND, OUT)\u003c\/li\u003e \u003cli\u003eSupply voltage 4.5 to 5.5 V, detection frequency up to 100 kHz\u003c\/li\u003e \u003cli\u003eCan be connected directly to digital inputs or interrupt pins of microcontrollers\u003c\/li\u003e \u003cli\u003eScope of delivery: two sensor boards, two code discs, connection cable\u003c\/li\u003e \u003cli\u003eEnables simultaneous detection on two motors or wheels\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eAn encoder of this type measures the speed and position of rotating shafts through optical pulse detection. The slotted optical switch consists of an infrared emitter diode and a phototransistor positioned opposite each other in a narrow slot. A slotted code disc is attached to the motor shaft and rotates through this slot. With each revolution, the edge of the disc interrupts the light beam several times, and the evaluation electronics convert these interruptions into digital square-wave signals.\u003c\/p\u003e \u003cp\u003eThe output signal is accessed via the third connection and can be connected directly to an interrupt input of a microcontroller, without having to pause the program loop. The current speed is calculated from the pulse frequency and the known number of slots in the code disc. With a supply voltage between 4.5 and 5.5 volts, the module is within the voltage range of common development boards and controllers. The maximum detection frequency of 100 kHz enables the measurement of rapidly rotating shafts.\u003c\/p\u003e \u003cp\u003eThe module is suitable for measuring the speed of DC motors, building encoders for robotic vehicles, and general pulse counting on rotating components. The scope of delivery includes two identical sensor-code disc pairs, allowing the module to be used simultaneously on two wheels of a vehicle to monitor both drive wheels independently or detect slipping and blockages. The sensor can also be used as a simple optical switch for object detection.\u003c\/p\u003e \u003cp\u003eFor operation, the supply voltage and ground must be connected to the pin header. The code discs must be attached to the motor shafts; mechanical coupling is the user's responsibility.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe module is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Beware of rotating parts during operation to prevent crushing and abrasion injuries. If you have questions about the power supply or connection technology, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003eFor operation, the supply voltage and ground must be connected to the pin header. The code discs must be attached to the motor shafts; mechanical coupling is the user's responsibility.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997950812509,"sku":"F23106792","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/hc-020k-schrittzaehler-fuer-motoren-wheel-encoder-funduino-8479793.jpg?v=1791495106"},{"product_id":"servohalterung-fur-towerpro-sg90-mg90s-ts90a-emax-es08maii-es08ma2-es08mdii-es08md2","title":"Servo mount for SG90 and MG90s - plastic, 2 mounting points","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic bracket for micro servos with a gear shaft\u003c\/li\u003e \u003cli\u003eCompatible with TowerPro SG90 and MG90 s as well as equivalent models\u003c\/li\u003e \u003cli\u003eAttached with screws to the bracket; the servo remains removable\u003c\/li\u003e \u003cli\u003eHole pattern for universal mounting on frames and structures\u003c\/li\u003e \u003cli\u003eTwo mounting points for secure and adjustable positioning\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis plastic bracket enables the secure mounting of micro servos with a gear shaft in robotics and model-building projects. It is suitable for common servo types such as the SG90 and equivalent models, as well as the more robust MG90 s gearbox.\u003c\/p\u003e \u003cp\u003eThe servo is inserted into the bracket from above and secured with mounting screws. The design provides two anchor points that can be used for either tight or adjustable mounting, depending on requirements. The hole pattern allows mounting on standard frames and structures, such as those used in robotic arms, camera pans, and steering applications.\u003c\/p\u003e \u003cp\u003eTypical applications include building robotic arms with multiple controlled axes, pan and tilt mechanisms for sensors, and steering systems in model vehicles. In robotics, the bracket is often used multiple times to create kinematic chains.\u003c\/p\u003e \u003cp\u003eM2 or M2.5 mounting screws are required for installation, depending on the exact hole size of the selected bracket. The servo itself must be purchased separately if it is not already available.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes, tests, and development projects. In projects with moving parts, ensure that crushing and shearing points are mitigated by protective devices or safe clearances. Work on or near electrical installations must be carried out by qualified electricians; if anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x servo bracket\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997952876893,"sku":"F23109109","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/servohalterung-fuer-towerpro-sg90-mg90s-ts90a-emax-es08maii-es08ma2-es08mdii-es08md2-funduino-7879926.png?v=1791495578"},{"product_id":"n20-motorhalterung-motorbefestigung-fur-mini-n20-getriebemotor","title":"N20 motor mount - 2 mounting options, M3 thread","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMounting bracket for N20 micromotors\u003c\/li\u003e \u003cli\u003ePlastic and aluminum materials\u003c\/li\u003e \u003cli\u003eTwo mounting options for different installation positions\u003c\/li\u003e \u003cli\u003eSuitable for axles with a diameter of 5 mm\u003c\/li\u003e \u003cli\u003eSecured with M3 threads\u003c\/li\u003e \u003cli\u003eBroad range of applications in robotics and model building thanks to its compact design\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis motor mount securely attaches N20 micromotors to robots or models. The mount is secured with two mounting points and holds the motor in position in different ways, depending on whether the motor shaft is intended to run horizontally or vertically. This eliminates the need for several different mounts for each project.\u003c\/p\u003e \u003cp\u003eThe 5 mm diameter motor shaft fits into the designated holder. Two M3 threaded holes are used to attach the mount to chassis or support frames. The plastic and aluminum construction combines low weight with rigidity, preventing the motor from vibrating when the drive is running.\u003c\/p\u003e \u003cp\u003eThe mount is typically used in wheeled, tracked-drive, or articulated robots where multiple motors need to be positioned next to each other or on different axles. It also saves time during modifications and repairs of vehicle models with quick wheel changes.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe mount is a component intended solely for prototyping and model building. All electrical work on the motor and its power supply must be carried out by a qualified electrician or require their consultation before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x motor mount for N20 mini gear motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997957005661,"sku":"F23107324","price":1.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/n20-motorhalterung-motorbefestigung-fuer-mini-n20-getriebemotor-funduino-3541420.png?v=1791496322"},{"product_id":"funduino-mg995-servo-vgl-mit-towerpro-180-version","title":"Funduino MG995 servo - 180°, 13 kg*cm, 4,8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo with a 180-degree rotation range\u003c\/li\u003e \u003cli\u003eMaximum torque of 10 kg*cm at 4.8 V, 13 kg*cm at 6 V\u003c\/li\u003e \u003cli\u003eOperating voltage of 4.8 to 6 V\u003c\/li\u003e \u003cli\u003eControl via PWM signal (1–2 ms pulse width)\u003c\/li\u003e \u003cli\u003eConnector in standard servo format (3 pins, signal, GND, +V)\u003c\/li\u003e \u003cli\u003eFast response, robust gears for repeated loads\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe servo is an analog actuator for positioning and torque applications in a range of up to 180 degrees. It is controlled via PWM signals (pulse-width modulation), with a pulse width between 1 and 2 milliseconds determining the target position. Positioning accuracy depends on the stability of the controlling system.\u003c\/p\u003e \u003cp\u003eTorque varies with the operating voltage. At 4.8 V, it is 10 kg*cm; at 6 V, it increases to 13 kg*cm. This makes the servo suitable for light to medium mechanical loads; higher voltages are not supported. The standard connector enables direct connection to common servo connections on microcontroller boards or servo driver modules.\u003c\/p\u003e \u003cp\u003eTypical applications include robot joint control, model aircraft, camera panning, and control valves in prototypes. In model making, the servo enables control of control surfaces or steering axes with high repeatability.\u003c\/p\u003e \u003cp\u003eAn external power supply in the range of 4.8 to 6 V is required for operation. PWM control is provided via a digital pin of the microcontroller, typically at a frequency of 50 Hz. A separate servo driver module is not strictly necessary if the microcontroller can provide sufficient current during idle operation; however, higher loads or multiple servos require an external power supply with sufficient capacity.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes. Do not overload the gears; blockages can cause damage and overheating. If there is no protection against mechanical overload, gears may break.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino MG995 Servo, comparable to TowerPro - 180° Version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997958283613,"sku":"F23109103","price":5.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-mg995-servo-vgl-mit-towerpro-180-version-funduino-4668295.png?v=1791496071"},{"product_id":"elektromotor-rs260-3v-6v-dc","title":"RS260 electric motor - direct drive","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSmall motor for DC operation between 3 and 6 volts\u003c\/li\u003e \u003cli\u003eDimensions and weight enable installation in compact models\u003c\/li\u003e \u003cli\u003eCan be controlled via external power electronics\u003c\/li\u003e \u003cli\u003eDirect drive without gears\u003c\/li\u003e \u003cli\u003eTypical speed in the low four-digit range\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis DC motor is a lightweight, compact drive for operation with batteries or low-voltage power sources between 3 and 6 volts. Operating directly within this voltage range enables simple wiring in prototypes and experimental projects without the need for additional voltage converters.\u003c\/p\u003e \u003cp\u003eThe motor operates according to the principle of electromagnetic force acting on current-carrying conductors in a magnetic field. An external power source with sufficient capacity must be provided; power consumption depends on the mechanical resistance during operation. The rotational speed can be controlled by changing the operating voltage or using pulse-width modulation.\u003c\/p\u003e \u003cp\u003eThis motor can be used in small robotic vehicles, model-making projects, and automated experimental setups. In a simple mobile robot, for example, it drives the wheels while control electronics determine the direction and speed of travel. The motor is also suitable for rotary or linear movements in test setups.\u003c\/p\u003e \u003cp\u003eA battery or power supply with regulated DC voltage is required for the power supply. Power electronics for speed control are not included and must be purchased separately if required. The motor itself has no internal overcurrent protection.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe motor must not be connected to the mains power supply. It is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations is reserved for qualified electricians; if you are unsure about the power supply, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eRS 260 electric motor\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997974110557,"sku":"F23108245","price":1.74,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/elektromotor-rs260-3v-6v-dc-funduino-9581901.jpg?v=1791495179"},{"product_id":"getriebemotor-1-48-ubersetzung-3-6v-mit-stecker-doppelte-achse","title":"Gear Motor 1:48 - 3-6 V, dual shaft, with connector","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDC gear motor with 1:48 gearing and dual shaft\u003c\/li\u003e \u003cli\u003eOperating voltage 3 to 6 V\u003c\/li\u003e \u003cli\u003eConnection via plug connector without soldering\u003c\/li\u003e \u003cli\u003eSpeed approx. 90–200 rpm depending on voltage\u003c\/li\u003e \u003cli\u003eCan only be controlled via a separate motor driver\u003c\/li\u003e \u003cli\u003ePlastic housing with gear transmission, metal motor housing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA gear motor with 1:48 reduction converts the high speed of the DC motor into slow, high-torque rotation. The output shaft extends on both sides, allowing one motor to drive two wheels or drive components simultaneously. The plastic housing contains the gear transmission, while the motor housing is made of metal.\u003c\/p\u003e \u003cp\u003eConnected cables with plugs enable immediate connection to a power source or motor driver without soldering. The direction of rotation can be reversed by swapping the polarity. At a voltage of 3 V, the shaft reaches approximately 90 revolutions per minute; at 6 V, it reaches around 200 revolutions per minute.\u003c\/p\u003e \u003cp\u003eThe operating current significantly exceeds the load capacity of microcontroller pins. A separate motor driver such as the L298N must be connected between the motor and the control board to regulate the direction of rotation and speed. Such drivers also enable pulse-width modulation for stepless acceleration and braking.\u003c\/p\u003e \u003cp\u003eThe motor is suitable for small robotic vehicles, line followers with two driven wheels, model vehicles, and school projects. A DC power source (3–6 V), a motor driver IC, and, if required, connection cables to the control board are needed.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis motor is intended exclusively for building prototypes and for testing and development purposes. Correct connection to the motor driver is required to prevent damage. If you are unsure about the power supply or driver connection, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Gear motor 1:48 gearing 3-6V with plug, dual shaft\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998041710941,"sku":"F23107891","price":2.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/getriebemotor-148-uebersetzung-3-6v-mit-stecker-doppelte-achse-funduino-4247324.png?v=1791496147"},{"product_id":"funduino-mg995-servo-vgl-mit-towerpro-360-version","title":"Funduino MG995 Servo - 360° continuous rotation, 4.8-7.2 V, 15 kg·cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eRotating servo actuator module for robotics and mechanical control tasks\u003c\/li\u003e \u003cli\u003eContinuous-rotation model without end stops, providing full 360-degree rotation\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 to 7.2 volts, with current consumption depending on load and rotational speed\u003c\/li\u003e \u003cli\u003ePWM control via standard servo signals (50 Hz)\u003c\/li\u003e \u003cli\u003eTorque of up to 15 kg·cm at optimal voltage\u003c\/li\u003e \u003cli\u003eDimensions and weight designed for installation in mobile robots\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo is a continuously rotating actuator module that differs from conventional positioning servos by allowing constant rotation in both directions instead. It is used in robot constructions, mobile platforms, and applications requiring the continuous rotation of wheels, shafts, or mechanisms.\u003c\/p\u003e \u003cp\u003eThe module is controlled using standard PWM signals, as supplied by any common microcontroller board. The control pulse width determines the direction and speed of rotation. It requires a power supply between 4.8 and 7.2 volts. Power consumption can be considerable under higher loads or at maximum speed, so the power supply should be adequately rated and should not be powered by the board's power supply.\u003c\/p\u003e \u003cp\u003eTypical applications include drive robots with direct wheel drive, rotating platforms for sensors or cameras, and manipulators with rotating axes. In a mobile platform, for example, two of these servos control the drive wheels, while PWM signals from an Arduino-compatible board enable forward, reverse, and turning movements.\u003c\/p\u003e \u003cp\u003eOperation requires a microcontroller board with PWM-capable digital outputs, a regulated power supply (battery or power adapter) with sufficient current capacity, and mechanical mounting hardware. The maximum limits are determined by the torque and rotational speed, which depend on the available voltage and the mechanical load.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThis module is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for integration into household electrical circuits. During operation, torque and rotating parts can cause crushing injuries or other injuries. A qualified electrician must be consulted when working on the power supply or if there is any uncertainty about commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino MG995 Servo, comparable to TowerPro - 360° version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998106394973,"sku":"F23108963","price":6.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-mg995-servo-vgl-mit-towerpro-360-version-funduino-9841434.png?v=1791496167"},{"product_id":"3-6v-getriebemotor-1-120-ubersetzung-doppelachse","title":"Geared motor 3-6 V - 1:120 gear ratio, dual shaft","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGear motor with 6 V operating voltage\u003c\/li\u003e \u003cli\u003e1:120 reduction ratio for high torque at low speed\u003c\/li\u003e \u003cli\u003eDual shaft on the output shaft\u003c\/li\u003e \u003cli\u003eCompact design for space-constrained installations\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis gear motor combines a small DC motor with a multi-stage gear train. With a 1:120 reduction ratio, the high motor speed is reduced to a low rotational speed, while the torque increases significantly. This makes it ideal for applications where power matters more than speed.\u003c\/p\u003e \u003cp\u003eThe 6 V operating voltage requires a suitable power supply via battery or adapter. The two axially arranged outputs make it possible to drive two independently operated mechanisms or to connect gear shafts rotating in opposite directions. Speed and torque can be adjusted variably using simple speed control with a PWM signal.\u003c\/p\u003e \u003cp\u003eThe motor is used in robotics projects to drive vehicle mechanisms, as well as in model building for compact gear drives or in experimental setups for lever and pulley systems. The compact design offers particular advantages over larger motors in constructions where space is limited.\u003c\/p\u003e \u003cp\u003eOperation requires a suitable power supply with sufficient current capacity. The dual shaft requires a mechanical interface on each side for power transmission, for example via gears, belts, or couplings. Gear backlash and play depend on careful assembly.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe power supply must be dimensioned precisely to prevent damage caused by voltage spikes. The product is intended exclusively for building prototypes and for testing and development purposes. If it is integrated into consumer devices, the relevant safety regulations must be observed and a qualified electrician must be consulted.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V gear motor - 1:120 reduction ratio, dual shaft\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998291927389,"sku":"F23108344","price":2.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-getriebemotor-1120-uebersetzung-doppelachse-funduino-2269239.png?v=1791495840"},{"product_id":"antriebsrad-fur-getriebemotor","title":"Drive wheel for geared motor - gear Ø 24 mm, module 0,5, 4 mm bore","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eDrive gear for geared motors\u003c\/li\u003e \u003cli\u003eGear diameter: 24 mm\u003c\/li\u003e \u003cli\u003e4 mm bore for motor shaft\u003c\/li\u003e \u003cli\u003eModule 0.5 with 48 teeth\u003c\/li\u003e \u003cli\u003ePlastic material\u003c\/li\u003e \u003cli\u003eMounting with a key or clamping ring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe drive gear is a gear for transmitting power to geared motors. It connects the motor shaft to driven components and transfers torque. With a diameter of 24 mm and 48 teeth at module 0.5, the gear fits motor shafts with a diameter of 4 mm. Its plastic construction enables lightweight designs without adding extra weight.\u003c\/p\u003e \u003cp\u003eModule 0.5 is a standardized gear measurement that determines compatibility with other gears of the same module. Anyone transmitting higher torque needs gears with a higher module. The gear is mounted using a key or a clamping ring, depending on the requirements for secure fastening and removability.\u003c\/p\u003e \u003cp\u003eApplications include lightweight drives in robots, model making, and laboratory setups. A typical scenario is transferring a motor shaft to a larger-diameter gear in order to reduce speed and increase torque. For permanent or heavily loaded gearboxes, metal is the better choice.\u003c\/p\u003e \u003cp\u003eThe gear fits only motor shafts with exactly 4 mm diameter. Gears with a different module will not mesh. When selecting the mounting system, it should be clear whether the gear will need to be removed later or may remain permanently installed.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe drive gear is intended exclusively for building prototypes and for testing and development purposes. During operation, there is a risk of crushing and injury if rotating parts are touched; a cover or protective guard must be installed. Do not perform any work on or immediately next to the running drive.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Drive gear for geared motor (motor not included)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998292091229,"sku":"F23109112","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/antriebsrad-fuer-getriebemotor-funduino-7968122.png?v=1791495470"},{"product_id":"funduino-sg90-servomotor-vgl-towerpro","title":"Funduino SG90 servo motor - 9 g, 180°, 3,5-6 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo motor with ~180° rotation angle, 9 g weight\u003c\/li\u003e \u003cli\u003ePWM control via a single digital pin\u003c\/li\u003e \u003cli\u003eOperating voltage 3.5 to 6 V\u003c\/li\u003e \u003cli\u003eJR connector with integrated signal wire\u003c\/li\u003e \u003cli\u003ePlastic housing with POM gears\u003c\/li\u003e \u003cli\u003eScope of delivery: motor, linkage arm, mounting screws\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo motor rotates an output shaft to a specified angle and automatically holds the position. A DC motor drives the shaft via plastic gears, while a potentiometer detects the current position. The internal control electronics adjusts the motor until the desired position is reached.\u003c\/p\u003e \u003cp\u003eThe control signal is sent via PWM over a single signal wire; a digital output from a microcontroller is sufficient. The pulse length directly determines the rotation angle. All three wires (power, signal, ground) run through the JR-compatible connector, so only one plug connection is required.\u003c\/p\u003e \u003cp\u003eThe low weight of 9 g and compact size enable use in lightweight mechanisms such as camera mounts, model vehicle steering systems, or robotics prototypes. The stall torque is not sufficient for permanently high loads or continuous rotation.\u003c\/p\u003e \u003cp\u003eOperation is possible at voltages between 3.5 and 6 V. Connection to 5 V microcontroller boards is possible, as is connection to 4.8 V battery packs in model vehicles. If you work with 3.3 V systems, you should check the lower voltage limit, as performance decreases there.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eIncorrect polarity can damage the servo; check the connector pin assignment before connecting it. The gears can be damaged by overloading or a jammed shaft; do not turn the shaft against its stop. This product is intended exclusively for building prototypes and for testing and development purposes, not for continuous operation in household power circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003eFunduino SG90 servo motor (cf. TowerPro)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998294876509,"sku":"F23107201","price":2.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-sg90-servomotor-vgl-towerpro-funduino-4116288.png?v=1791496607"},{"product_id":"3-6v-getriebemotor-1-200-ubersetzung-einfache-achse","title":"Gear motor 3-6 V - 1:200 gear ratio, single shaft","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGeared motor with 6 V operating voltage\u003c\/li\u003e \u003cli\u003e1:200 gear ratio for low torque at high speed\u003c\/li\u003e \u003cli\u003eSimple shaft mount for direct shaft coupling\u003c\/li\u003e \u003cli\u003ePermanent-magnet DC motor\u003c\/li\u003e \u003cli\u003eRobust gear transmission in a plastic housing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe geared motor is a compact direct drive for models and prototypes that require constant, easily adjustable rotational movement. The 1:200 gear ratio converts the motor's high output speed into high torque without requiring additional gearing.\u003c\/p\u003e \u003cp\u003eWhen connected to a 6 V power source, the motor starts immediately. The speed can be controlled by reducing the voltage or using pulse-width modulation. The simple shaft mount directly accommodates standard shaft couplings or gears, eliminating the need for adapters and making installation straightforward.\u003c\/p\u003e \u003cp\u003eApplications include vehicle models with all-wheel drive, laboratory-scale conveyor systems, or wind turbine demonstrators. The motor is suitable wherever smooth, low-maintenance movement is required over extended periods. Frequent high-frequency switching on and off shortens its service life.\u003c\/p\u003e \u003cp\u003eOperation requires a DC power supply or battery power source with at least 6 V. Mechanical overload causes the motor to stall and heat to build up; the power supply must be disconnected if the motor remains blocked for an extended period. The motor is not designed for continuous operation at ambient temperatures above 40 °C.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eMake sure the power supply is connected with the correct polarity; an incorrect connection will not damage the motor, but will make it rotate in the opposite direction. The device is not intended for installation in household electrical circuits and is intended exclusively for building prototypes and for testing and development purposes. If you have questions about the power supply or integration into larger systems, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V geared motor - 1:200 gear ratio, simple shaft\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998297629021,"sku":"F23106694","price":1.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-getriebemotor-1200-uebersetzung-einfache-achse-funduino-7036239.png?v=1791495867"},{"product_id":"funduino-standard-38g-servo-bauform-wie-sg5010","title":"Funduino standard servo 38 g - 180°, 4,8-6 V, 3,7 kg\/cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog servo with a standard form factor for positioning tasks in model building and prototype development\u003c\/li\u003e \u003cli\u003eRotation range from 0 to 180 degrees, positioning time of approximately 0.19 seconds at full load\u003c\/li\u003e \u003cli\u003eOperating voltage: 4.8 to 6 volts\u003c\/li\u003e \u003cli\u003ePWM control signal (pulse-width modulation) via a standard servo connector\u003c\/li\u003e \u003cli\u003eMaximum load of approximately 3.7 kilograms with a 1-centimeter lever arm\u003c\/li\u003e \u003cli\u003ePlastic housing with plastic gears, dimensions of approximately 40*20*37 millimeters\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis analog servo responds to PWM signals and positions its output shaft according to the pulse pattern. Its rotation range of 0 to 180 degrees covers most standard applications.\u003c\/p\u003e \u003cp\u003eThe positioning time of approximately 0.19 seconds indicates the response speed at full load. The servo requires an operating voltage of 4.8 to 6 volts and can be connected directly to the PWM outputs of common microcontroller boards. It works with the standard logic levels of these boards without additional driver electronics.\u003c\/p\u003e \u003cp\u003eTypical applications include steering mechanisms in moving models, flaps and rudder controls in aircraft models, gripper arms in robotics prototypes, and simple rotational movements for visualizing sensor values. The maximum transferable load is approximately 3.7 kilograms with a simple lever arm, allowing you to quickly determine the system's limits.\u003c\/p\u003e \u003cp\u003eThe servo is supplied with a standard servo connector; depending on the overall setup, a separate power source in the 4.8 to 6 volt range must be available. Simultaneous movement of multiple servos requires a powerful power supply, as each active servo draws peak currents.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe servo is intended exclusively for building prototypes and for testing and development purposes and is not suitable for continuous operation in an uncontrolled environment. When operating more than one servo or using automated movement sequences, ensure an adequate power supply to prevent voltage drops. Before using the servo in applications with potential hazards, observe the applicable safety requirements.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Funduino Standard 38G Servo, form factor similar to SG5010\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998300479837,"sku":"F23106433","price":4.97,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/funduino-standard-38g-servo-bauform-wie-sg5010-funduino-2743845.png?v=1791495491"},{"product_id":"3-6v-getriebemotor-1-200-ubersetzung-doppelachse","title":"Geared motor 3-6 V - 1:200 gear ratio, dual shaft","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGeared motor for 6 V operating voltage\u003c\/li\u003e \u003cli\u003eGear ratio 1:200\u003c\/li\u003e \u003cli\u003eDual shaft for symmetrical power transmission\u003c\/li\u003e \u003cli\u003eHigh torque output at reduced speed\u003c\/li\u003e \u003cli\u003eCompact design for model making and robotics\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis geared motor combines a brushed DC motor with a multi-stage gearbox to achieve high torque at moderate speeds. The 1:200 gear ratio reduces the motor speed to less than 1 revolution per second while still providing sufficient power for load and drive applications. Thanks to the dual shaft, both sides of the gearbox can be used for power output, or synchronous movements of two wheels or mechanisms can be driven.\u003c\/p\u003e \u003cp\u003eThe 6 V supply voltage enables direct connection to batteries or rechargeable batteries without a voltage converter. PWM control is suitable for continuously variable speeds, while a relay or MOSFET is sufficient for simple on-off switching. This motor is used in projects such as automated guided vehicles, model railways, lifting tables, or geared winches; it also provides sufficient output with good control for driving slewing ring bearings or slowly rotating rollers.\u003c\/p\u003e \u003cp\u003eOperation requires a power source with at least 6 V and sufficient current capacity. The gearbox cannot withstand overloading; mechanical decoupling or a slip clutch provides protection in the event of a blockage. The dual shaft only permits synchronous use if both shafts are loaded equally.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis motor generates high forces when blocked and briefly draws increased currents. The power supply must be equipped with suitable protective switches. The product is intended exclusively for building prototypes and for testing and development purposes and is not intended for installation in the household power circuit.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V geared motor - 1:200 gear ratio, dual shaft\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998305100125,"sku":"F23109009","price":2.15,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3-6v-getriebemotor-1200-uebersetzung-doppelachse-funduino-5190191.png?v=1791495504"},{"product_id":"tiankongrc-ts90a-servo-3-3v","title":"TIANKONGRC TS90 A micro servo motor - 3,3-6 V, 1,5 kg·cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAnalog micro servo motor with plastic gears\u003c\/li\u003e \u003cli\u003eOperating voltage 3.3 to 6 V, torque up to 1.5 kg\/cm at 6 V\u003c\/li\u003e \u003cli\u003eControl via PWM signal (standard servo pulse)\u003c\/li\u003e \u003cli\u003eRotation angle 180 to 200 degrees, counterclockwise rotation\u003c\/li\u003e \u003cli\u003e3-pin connector for ground, voltage, and control signal\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis servo motor is controlled via PWM signals and is suitable for precise positioning tasks in RC models, robots, and moving mechanisms. The pulse duration determines the target position of the output shaft, while an internal plastic gear train transfers the power from the drive motor to the output shaft.\u003c\/p\u003e \u003cp\u003eThe operating voltage is between 3.3 and 6 V. Higher voltage increases both rotational speed and torque; at 4.8 V, the motor reaches 110 rpm and 1.3 kg\/cm, while at 6 V it reaches 130 rpm and 1.5 kg\/cm. The control system operates analogously, with the motor continuously adjusting its current position to the applied PWM signal.\u003c\/p\u003e \u003cp\u003eThe rotation range is 180 to 200 degrees counterclockwise. Typical applications include steering functions in model vehicles, rudder control in model aircraft, swiveling camera mounts, and robot arms. When stationary, the servo requires only a few milliamps, but power consumption increases significantly under load or when the shaft is blocked.\u003c\/p\u003e \u003cp\u003eConnection is made via a 3-pin connector with separate wires for ground, supply voltage, and control signal. The increased power consumption under load should be taken into account when designing the power supply.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen directly connected to 5 V logic outputs of a microcontroller board, the servo's control signal may exceed its 3.3 V level; a level shifter is then required. This product is intended exclusively for building prototypes, tests, and development projects and is not suitable for operation in fixed installations or domestic electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x TIANKONGRC TS90A Servo - 3.3V\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998357856605,"sku":"F23107286","price":3.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/tiankongrc-ts90a-servo-33v-funduino-9150836.png?v=1791496473"},{"product_id":"felge-rad-reifen-fur-n20-motoren-chassis","title":"Wheel for N20 geared motor - rim with rubber tire, Ø 65 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eComplete wheel with rim and mounted tire for N20 motors\u003c\/li\u003e \u003cli\u003eDiameter 65 mm, width 26 mm\u003c\/li\u003e \u003cli\u003e3 mm bore fits directly onto N20 motor shafts\u003c\/li\u003e \u003cli\u003ePlastic rim with rubber tire for traction\u003c\/li\u003e \u003cli\u003eSuitable for small robots, vehicles, and mobile chassis with a total weight of up to approximately 500 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis wheel is a universal drive solution for vehicles based on N20 geared motors. The 65 mm rim with its mounted rubber tire is fitted directly onto the 3 mm motor shaft and requires no additional fastening. With the gear ratios commonly used, the diameter provides practical driving speeds between 0.5 and 2 m\/s.\u003c\/p\u003e \u003cp\u003eThe rubber tire provides sufficient traction to drive four wheels of this type; with four N20 motors, it creates a stable vehicle chassis. The plastic rim is wear-resistant and suitable for typical laboratory environments as well as indoor and outdoor surfaces. Cornering without slipping is easily possible on level floors.\u003c\/p\u003e \u003cp\u003eThe wheel fits any N20 motor chassis without modification. To build a four-wheel-drive vehicle, four wheels, four motors with the appropriate gearing, and a vehicle frame are required; the wheels themselves already provide the correct geometry for symmetrical arrangement.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis accessory is not intended for operation with household electrical installations. It is intended exclusively for building prototypes and for testing and development purposes, and is used with N20 DC motors supplied with low voltages.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cp\u003e1x rim \/ wheel \/ tire for N20 motors\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998373618013,"sku":"F23107355","price":1.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/felge-rad-reifen-fuer-n20-motoren-chassis-funduino-5243806.png?v=1791496484"},{"product_id":"mikromotor-solarmotor-elektromotor-1-5v-9v-dc-rf-300ca-11440","title":"RF-300CA-11440 micro motor - 1.5-9 V DC, shaft Ø 2 mm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eSmall electric motor for 1.5 V to 9 V DC\u003c\/li\u003e \u003cli\u003eHigh rotational speed under low load\u003c\/li\u003e \u003cli\u003eSuitable for solar applications and battery operation\u003c\/li\u003e \u003cli\u003eLightweight design enables easy installation\u003c\/li\u003e \u003cli\u003eRobustly designed for learning and development projects\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis DC motor operates at voltages from 1.5 V to 9 V, making it suitable for direct operation with solar panels, batteries, or USB power supplies without requiring additional voltage regulators. Its wide voltage tolerance makes it particularly flexible for different power sources.\u003c\/p\u003e \u003cp\u003eThe motor runs at high speed and requires a suitable gearbox or belt transmission for applications involving significant torque. Its low power consumption under light loads enables long battery runtimes. Pulse-width modulation is recommended for precise speed control.\u003c\/p\u003e \u003cp\u003eTypical applications include small solar vehicles, propeller drives in model aircraft, rotating elements in art installations, or learning projects for motor control with microcontrollers. The motor fits into compact housings and weighs only a few grams.\u003c\/p\u003e \u003cp\u003eFor operation, a suitable power source within the specified voltage range or a PWM controller is required. The exact speed depends on the load and current consumption and is not documented. A gearbox must be purchased separately if higher torque is required.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis motor is intended only for building prototypes and for testing and development purposes. Do not connect the motor directly to the mains power supply or to voltages higher than specified. If unsure, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Micromotor \/ Solar Motor \/ Electric Motor 1.5V - 9V DC - RF-300CA-11440\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998395736413,"sku":"F23106673","price":1.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mikromotor-solarmotor-elektromotor-15v-9v-dc-rf-300ca-11440-funduino-5924168.png?v=1791496497"},{"product_id":"getriebemotor-tt-3-6v-mit-rad-felge-reifen","title":"TT geared motor - with Ø 65 mm wheel, 3-6 V, 1:48","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eGeared motor with a mounted wheel consisting of a rim and tire\u003c\/li\u003e \u003cli\u003eOperating voltage 3 to 6 V, gear ratio 1:48\u003c\/li\u003e \u003cli\u003eSpeed 90 rpm at 3 V, 200 rpm at 6 V\u003c\/li\u003e \u003cli\u003eWheel diameter 65 mm, wheel width 28 mm\u003c\/li\u003e \u003cli\u003ePower supply via terminals or solder points\u003c\/li\u003e \u003cli\u003ePlastic motor housing, dimensions 70 * 20 * 23 mm\u003c\/li\u003e \u003cli\u003eFor use in robot chassis and small vehicle models\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis geared motor is a DC motor with a gearbox upstream and a wheel already mounted. The motor and gearbox are enclosed in the plastic housing, and the short output shaft carries the wheel with a yellow rim and black tire. The compact unit measures 70 * 20 * 23 mm and is lightweight, which is essential for mobile projects.\u003c\/p\u003e \u003cp\u003ePower is supplied through two connection points on the motor, which can be connected either with terminals or solder wire. At operating voltages between 3 and 6 V, the gearbox with its 1:48 gear ratio reaches speeds of 90 rpm at 3 V and 200 rpm at 6 V, respectively. Torque increases with the voltage from approximately 0.15 Nm to up to 0.60 Nm.\u003c\/p\u003e \u003cp\u003eThe wheel, with a diameter of 65 mm and a width of 28 mm, has a rubber tire with tread on a rigid rim. This combination provides traction on the ground while keeping weight low. Speed and direction can be controlled using a motor driver with a PWM signal, or reversed by swapping the connections.\u003c\/p\u003e \u003cp\u003eThese motors are used in robot chassis, remote-controlled vehicles, and custom walking machines. Typically, two or four of these drives are operated in parallel to implement various steering concepts. Operation requires a motor driver that processes the controller's logic levels and supplies sufficient current to the motor.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe motor is intended exclusively for building prototypes and for testing and development purposes. The gearbox and output shaft rotate at high speed during operation; hair, clothing, and fingers must therefore always be kept clear. A qualified electrician must be consulted for projects involving or located near electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 3-6V geared motor with wheel and tire\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998408483165,"sku":"F23107466","price":2.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/getriebemotor-tt-3-6v-mit-rad-felge-reifen-funduino-1187097.png?v=1791496510"},{"product_id":"mg90s-metallgetriebe-micro-servo","title":"MG90S micro servo - metal gears, 2 kg·cm, 4.8-6 V","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro servo motor with metal gears for precise positioning\u003c\/li\u003e \u003cli\u003eControl via PWM signal (standard servo pulse)\u003c\/li\u003e \u003cli\u003eRotation angle up to 180°\u003c\/li\u003e \u003cli\u003eStall torque 2 kg\/cm at 4.8 V\u003c\/li\u003e \u003cli\u003e3-wire cable with JR-compatible connector\u003c\/li\u003e \u003cli\u003eOperating voltage 4.8 V\u003c\/li\u003e \u003cli\u003eCable length 24 cm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis servo motor with metal gears rotates its output shaft through an angle of up to 180° and positions it precisely according to a PWM control signal. An internal control loop compares the pulse width of the control signal with the actual shaft position and adjusts the motor until the desired position is reached.\u003c\/p\u003e \u003cp\u003eThe 4.8 V power supply is provided through two wires of the three-pin connection cable, while the third wire carries the control signal. The JR-compatible connector plugs directly into receiver boards used in model making and can also be connected to PWM-capable outputs of microcontrollers. The metal gears provide a stall torque of 2 kg\/cm and enable more robust power transmission than plastic gears.\u003c\/p\u003e \u003cp\u003eThe motor is suitable for applications involving mechanical loads, such as panning small cameras, moving robot grippers, or controlling model vehicles and aircraft. Since the control system complies with the standard servo protocol, common servo libraries for microcontroller platforms can be used without additional electronics.\u003c\/p\u003e \u003cp\u003eOperation requires a 4.8 V power source and a microcontroller or controller with a PWM-capable signal output. The 24 cm cable length determines the maximum distance between the servo motor and the control board.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis product is intended exclusively for building prototypes and for testing and development purposes. When connecting and operating the product, ensure that the power supply polarity is correct; incorrect connections may cause damage. If you are unsure about integrating the product into a larger system, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MG90S metal gear micro servo\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998409630045,"sku":"F23107470","price":4.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/mg90s-metallgetriebe-micro-servo-funduino-5431341.png?v=1791496528"},{"product_id":"schrittmotor-28byj-48-mit-uln2003-treiberplatine","title":"28BYJ-48 stepper motor - with ULN2003 driver board, 5 V","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUnipolar stepper motor with integrated gearbox (1:64) and separate driver board\u003c\/li\u003e \u003cli\u003eControlled via four digital outputs of a microcontroller\u003c\/li\u003e \u003cli\u003e5 V DC operating voltage for motor and driver board\u003c\/li\u003e \u003cli\u003eStep angle of 5.625° per step, up to 17 revolutions per minute at no load\u003c\/li\u003e \u003cli\u003eMotor connected to the driver board via a 5-pin connector\u003c\/li\u003e \u003cli\u003eULN2003 driver provides the required motor currents\u003c\/li\u003e \u003cli\u003eFour LEDs on the board indicate active coils\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis stepper motor rotates in fixed angular increments when the four motor coils are activated in a defined sequence. An integrated gearbox with a 1:64 reduction ratio significantly increases the available torque and enables precise positioning with each 5.625-degree step. The driver board with a ULN2003 component is included and amplifies the weak control signals from a microcontroller to the high motor currents required.\u003c\/p\u003e \u003cp\u003eControl is performed via four inputs, IN1 to IN4, which are connected directly to four digital outputs of a microcontroller. Additional connections supply the board with 5 V and ground. The motor itself connects to the driver board via its preassembled cable and a 5-pin plug, preventing incorrect connections. Four LEDs on the board indicate which coil is currently active, helping with testing and troubleshooting.\u003c\/p\u003e \u003cp\u003eThe gearbox produces high torque for the motor's size even at low electrical power, making the motor suitable for light mechanical loads where precise and repeatable positioning is more important than speed. At no load, it reaches up to 17 revolutions per minute. Typical applications include camera sliders, small robot axes, and positioning tasks in automation projects.\u003c\/p\u003e \u003cp\u003eThe motor requires four available digital outputs on the microcontroller and a 5 V power supply for the driver board. The four motor coils must be controlled in the correct sequence, which is usually handled by suitable firmware. The motor reaches its limits under very high load or speed requirements.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe motor is operated exclusively with low voltages (5 V); operation with mains voltage is not possible and is not permitted. The device is intended only for prototypes and testing and development purposes. Work on or immediately next to the power supply or wiring should only be carried out by qualified electricians. If you are unsure before commissioning, consult a qualified electrician.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998415593821,"sku":"F23107464","price":2.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/schrittmotor-28byj-48-mit-uln2003-treiberplatine-funduino-7405375.png?v=1791496580"},{"product_id":"56-mm-rad-fur-micro-servo-sg90-sg92-mg90-servo-wheel-fur-robotik-modellbau","title":"Wheel for micro servo - Ø 56 mm, SG92, MG90","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlastic wheel for common micro servos with a 4 mm shaft diameter\u003c\/li\u003e \u003cli\u003eDiameter 56 mm, suitable for SG90, SG92, and MG90 servos\u003c\/li\u003e \u003cli\u003eFastened with four flat-head screws\u003c\/li\u003e \u003cli\u003eSuitable for mobility applications and mechanical drives\u003c\/li\u003e \u003cli\u003ePlastic material with black-and-white coloring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis 56-millimeter wheel connects common micro servos directly to mechanical loads. The 4-millimeter shaft diameter fits the motor shafts of SG90, SG92, and MG90 servos. It is fastened with four flat-head screws that keep the wheel centered and create a secure connection without an additional coupling.\u003c\/p\u003e \u003cp\u003eThe plastic wheel is suitable for vehicle-like constructions in which two or four wheels are driven by four different servos. It can also be used as a drive wheel for elevators or as a rotary drive for measuring instruments. The black-and-white coloring enables optical speed measurement, for example in control projects.\u003c\/p\u003e \u003cp\u003eThe limits of the servo used apply during operation. The wheel itself can only carry the load supplied by the motor. At higher torques, plastic wheels may slip or wear; metal alternatives are required for such applications. The wheel is supplied without mounting hardware and requires four M2 or M2.5 screws for attachment.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eDuring operation, the rotating wheel can catch hair, clothing, or fingers. Do not touch moving parts during operation. The product is intended exclusively for building prototypes and for testing and development purposes.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× 56 mm servo wheel for SG90\/SG92\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":66042598195549,"sku":"F23110462","price":1.98,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/3607-F23110462_01.png?v=1791497912"},{"product_id":"master-mikro-linearantrieb-aktuator-6v-7mm-s-128n-10-30-50-100mm-hub","title":"Micro linear actuator - 6 V, 128 N, 7 mm\/s, 10-100 mm stroke","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro linear actuator for lifting movements, 6 V operating voltage\u003c\/li\u003e \u003cli\u003e7 mm stroke, thrust force up to 128 N\u003c\/li\u003e \u003cli\u003eVarious versions available\u003c\/li\u003e \u003cli\u003eFast response time for cyclic applications\u003c\/li\u003e \u003cli\u003eCompact dimensions for space-saving installations\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eA linear actuator converts rotary motion into linear lifting movements. The device operates at 6 V DC and is suitable for automation tasks where space-saving solutions are required. An appropriate external power source must be provided for the 6 V power supply; direct connection to 5 V or 12 V systems then requires additional components.\u003c\/p\u003e \u003cp\u003eWith a thrust force of up to 128 N and a 7 mm stroke, the actuator produces fast lifting movements, for example to operate slides or trigger mechanical locks. The compact design allows installation in confined spaces, such as in models of automation systems or experimental robotics fixtures. Repeated extension and retraction is possible without wear to the mechanics or control system.\u003c\/p\u003e \u003cp\u003eThe actuator requires a PWM-capable or switching 6 V power supply and a switching module for control if it is to be controlled by a microcontroller board. Note the maximum force of 128 N; more powerful actuators are required for heavy loads or larger strokes.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eEnsure correct polarity when wiring; reverse polarity will damage the actuator. The module is intended exclusively for building prototypes and for testing and development purposes, and is not suitable for connection to household mains. Work on or near electrical installations must be carried out by qualified electricians; consult a qualified electrician before commissioning if anything is unclear.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Micro linear actuator 6V 7mm\/s 128N - stroke length depending on the selected version\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"10 mm","offer_id":66042933313885,"sku":"F23107522","price":43.71,"currency_code":"EUR","in_stock":true},{"title":"30 mm","offer_id":66045728227677,"sku":"F23105792","price":43.71,"currency_code":"EUR","in_stock":true},{"title":"50 mm","offer_id":66045728817501,"sku":"F23105793","price":48.02,"currency_code":"EUR","in_stock":true},{"title":"100 mm","offer_id":66045758898525,"sku":"F23107548","price":55.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/799-F23107522-M_01.png?v=1791485700"},{"product_id":"master-linearaktuator-wie-hydraulikzylinder-12v-150mm-20n-40n-60n-120n","title":"12 V Linear Actuator - 150 mm Stroke, IP54, 20-120 N","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eElectric linear actuator, 12 V DC\u003c\/li\u003e \u003cli\u003eStroke ranges and force vary depending on the variant\u003c\/li\u003e \u003cli\u003eDC motor with threaded drive\u003c\/li\u003e \u003cli\u003eIP54 protection against dust and splashing water\u003c\/li\u003e \u003cli\u003eSelectable fast-stroke mode for increased speed\u003c\/li\u003e \u003cli\u003eIntegrated limit switches\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe linear actuator moves loads in a straight line via an electrically driven lead screw. Its design follows the operating principle of a hydraulic cylinder, but it uses 12 V DC instead of hydraulic fluid. A three-phase brake secures the end position without a power supply.\u003c\/p\u003e \u003cp\u003eWhen current flows, a DC motor rotates the threaded nut while the rod can extend and retract linearly. Limit switches automatically interrupt the power supply when the maximum stroke is reached. Depending on the version, the stroke length and available force vary; choosing the right variant is particularly important for heavy loads.\u003c\/p\u003e \u003cp\u003eThe actuator is suitable for lifting tables, adjustable chairs and beds, storage management systems with access to multiple levels, or workshop carts with height-adjustable work surfaces. Such drives are also used in the manufacture of prostheses or medical devices.\u003c\/p\u003e \u003cp\u003ePower consumption depends on the load and stroke speed. In fast-stroke mode, the available force is reduced. Operation requires a 12 V power source with sufficient current capacity and a control relay or contactor to switch the motor and direction. The IP54 protection rating has limitations in cases of direct exposure to water or in dusty environments.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis linear actuator is intended exclusively for use in laboratory setups, prototypes, and testing and development projects. The component is not intended for operation in stationary systems or continuous production use and is not suitable for integration into household electrical installations. When working on the power supply or if you are unsure about the correct control method, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x linear actuator \/ lift rod, depending on the variant\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"with additional mounting holes \/ 20 N \/ 30 mm\/s","offer_id":66042951270749,"sku":"F23107365","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 60 N \/ 8 mm\/s","offer_id":66046899290461,"sku":"F23107360","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 120 N \/ 4 mm\/s","offer_id":66046902370653,"sku":"F23107364","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"with additional mounting holes \/ 40 N \/ 15 mm\/s","offer_id":66046905549149,"sku":"F23107369","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 20 N \/ 30 mm\/s","offer_id":66048232259933,"sku":"F23105720","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 60 N \/ 8 mm\/s","offer_id":66046899257693,"sku":"F23107359","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 120 N \/ 4 mm\/s","offer_id":66046906499421,"sku":"F23107370","price":47.27,"currency_code":"EUR","in_stock":true},{"title":"without additional mounting holes \/ 40 N \/ 15 mm\/s","offer_id":66046633967965,"sku":"F23107373","price":47.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-linearaktuator-wie-hydraulikzylinder-12v-150mm-20n-40n-60n-120n-funduino-6161713.png?v=1791499506"},{"product_id":"master-mikro-linearantrieb-hubstange-8mm-o-5-10mm-s-3-6v-30-40mm-hub","title":"Micro linear actuator - Ø 8 mm lift rod, 3-6 V, various stroke lengths","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eLinear actuator with push rod, electromagnetic drive\u003c\/li\u003e \u003cli\u003eStroke lengths from 5 to 10 mm\u003c\/li\u003e \u003cli\u003eOperating voltage 3 to 6 V\u003c\/li\u003e \u003cli\u003eOperating current approx. 30 mA\u003c\/li\u003e \u003cli\u003eAvailable in several variants\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA linear actuator with a push rod converts electrical energy into linear motion. The device uses an electromagnetic principle to move a rod out of its rest position and retract it again. With operating voltages between 3 and 6 V, the actuator is suitable for battery-powered systems and small electronic projects, as no separate power supply with higher voltages is required.\u003c\/p\u003e \u003cp\u003eThe linear actuator operates with low power consumption of approximately 30 mA. Depending on the version, the push rod extends between 5 and 10 mm, which is sufficient for compact mechanisms and limited space requirements. The voltage range enables direct operation from battery packs, DC power sources, or microcontroller boards with suitable outputs.\u003c\/p\u003e \u003cp\u003eExamples of applications include remote-controlled models with mechanical functions, automated closures in boxes or enclosures, lifting mechanisms in prototypes, or rotating and folding operations in model making. The actuator can also be used as a component in test and development setups to perform repeated linear movements without requiring motors with gear-based conversion.\u003c\/p\u003e \u003cp\u003eThis actuator is not designed for longer stroke lengths or faster motion sequences. Control via switches, relays, or digital outputs of a microcontroller is possible provided that the control circuit has sufficient current capacity. Thermal load should be taken into account during continuous operation.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe linear actuator is not intended for installation in the household power circuit. The device is intended exclusively for building prototypes and for testing and development purposes. Before commissioning it at higher voltages or in connection with electrical installation systems, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1x Micro linear actuator \/ push rod, 8mm Ø, 5~10mm\/s, 3-6V - optionally 30 or 45 mm stroke\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"30 mm stroke ","offer_id":66042956874077,"sku":"F23107515","price":34.71,"currency_code":"EUR","in_stock":true},{"title":"45 mm stroke","offer_id":66045743595869,"sku":"F23107618","price":34.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/master-mikro-linearantrieb-hubstange-8mm-oe-510mms-3-6v-30-40mm-hub-funduino-6204825.jpg?v=1791485563"}],"url":"https:\/\/funduino.com\/en\/collections\/electric-motors.oembed","provider":"Funduino","version":"1.0","type":"link"}