{"title":"Cable","description":null,"products":[{"product_id":"40-stuck-breadboardkabel-weiblich-weiblich-100cm","title":"Female-to-female breadboard wires - 40 pieces, 100 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cables for breadboards, with female connectors on both ends\u003c\/li\u003e \u003cli\u003eLength: 100 cm\u003c\/li\u003e \u003cli\u003e40 pieces per set\u003c\/li\u003e \u003cli\u003eFor flexible circuit setups between components and prototyping boards\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eBreadboard connection cables with female connectors at both ends enable flexible point-to-point connections in circuit setups. The 100 cm version also bridges larger distances on the prototyping platform or to externally mounted components.\u003c\/p\u003e \u003cp\u003eThe set of 40 cables provides sufficient material for complex prototype circuits. If you want to connect several sensors, modules, or actuators over longer distances, this set provides the necessary quantity without having to reorder individual cables in between.\u003c\/p\u003e \u003cp\u003eThe female connectors fit standard headers and pin rows with a 2.54 mm pitch. For circuits with distributed components on prototyping boards or modular setups in robotics projects, the cables cover typical requirements. When building prototypes with several spatially distributed modules, cable swapping and soldering are no longer necessary.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cables are intended exclusively for building prototypes and for testing and development purposes. If you are unsure about the correct wiring, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x set of 40 female\/female breadboard cables (100cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997795852637,"sku":"F23106500","price":3.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-weiblichweiblich-100cm-funduino-9018074.png?v=1791494503"},{"product_id":"40-poliges-breadboardkabel-flachbandkabel-jumper-kabel-5m-rolle","title":"40-pin breadboard wires - ribbon cable, separable wires","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40-conductor ribbon cable for breadboard connections\u003c\/li\u003e \u003cli\u003eIndividual wires can be separated and used individually\u003c\/li\u003e \u003cli\u003eMale-to-male connection, both sides fitted with connectors\u003c\/li\u003e \u003cli\u003eLength: 17 cm\u003c\/li\u003e \u003cli\u003eColor coding for orientation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe ribbon cable connects breadboards to one another or to controllers, sensors, and other components. The 40 conductors are arranged flat next to one another and can be separated individually, allowing you to use only the wires you need. This turns one cable into a set of individual jumpers of different lengths as required.\u003c\/p\u003e \u003cp\u003eThe color-coded conductors make it easier to trace connections in a circuit setup. Because the conductors can be separated individually, the wiring can be adapted flexibly without creating waste or having to purchase too many individual jumpers. This saves materials and costs in larger projects.\u003c\/p\u003e \u003cp\u003eTypical applications include laboratory setups that are frequently rewired, as well as larger prototype projects with many signal lines. The variable separability is also helpful when learning, as individual connections can be adjusted quickly without having to use up the wire rolls.\u003c\/p\u003e \u003cp\u003eThe cable fits standard breadboards with a 2.54 mm pitch. The 17 cm length is sufficient for most circuit setups on the workbench; for larger distances between components, individual jumpers should be added.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe ribbon cable is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e5 meters of 40-pin breadboard cable, jumper cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997803225437,"sku":"F23107457","price":11.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-poliges-breadboardkabel-flachbandkabel-jumper-kabel-5m-rolle-funduino-6452047.png?v=1791493883"},{"product_id":"steckkabel-jst-ph2-0mm-4-p-20cm","title":"JST-PH 2.0 connector cable - 4-pin, 20 cm, 0.5 mm²","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePlug-in cable with JST-PH-2.0 connectors, 4-pin, 20 cm long\u003c\/li\u003e \u003cli\u003eConnection for batteries, sensors, and actuators with JST-PH socket\u003c\/li\u003e \u003cli\u003eConductor cross-section of 0.5 mm² for currents up to 2 A\u003c\/li\u003e \u003cli\u003eWires individually insulated and color-coded\u003c\/li\u003e \u003cli\u003eAssembled with crimp contacts, no soldering required\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe plug-in cable connects assemblies and energy storage devices via JST-PH connectors. The 20 cm long connector is suitable for compact setups in which components with JST-PH sockets, such as small lithium batteries or sensors, are connected to prototype boards.\u003c\/p\u003e \u003cp\u003eThe four wires are individually color-coded and terminate in crimp contacts that slide into the connector socket. This method saves soldering work and reduces thermal stress on sensitive components. The 0.5 mm² cross-section carries currents of up to approximately 2 A, which is sufficient for many sensors and small motors, but not for high-power loads such as high-performance LEDs or larger servos.\u003c\/p\u003e \u003cp\u003eThe cable is used in battery-powered projects, when assembling sensor chains, and in modular test setups. Solder-free assembly enables rapid configuration changes.\u003c\/p\u003e \u003cp\u003eA JST-PH socket is required as the mating connector, for example on a battery protection module or sensor board. A thicker wire cross-section is required for higher currents or longer connections.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for assembling prototypes and for testing and development purposes. Live contacts must be protected against short circuits, especially in battery applications. If you are unsure about correct use or current flow, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST PH2.0mm plug-in cable - 4 P - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997806960989,"sku":"F23106699","price":0.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-4-p-20cm-funduino-5192533.png?v=1791494518"},{"product_id":"batterieclip-9v-block-zu-jst-xh2-54","title":"9 V battery clip - adapter cable to JST XH2.54","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable connects 9 V batteries to JST-XH2.54 connectors\u003c\/li\u003e \u003cli\u003eEnables safe power supply without soldering\u003c\/li\u003e \u003cli\u003eRed and black wires with color coding\u003c\/li\u003e \u003cli\u003eSuitable for prototypes and test setups with standardized battery clips\u003c\/li\u003e \u003cli\u003eEliminates the need for dedicated power supply modules in simple projects\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects 9 V batteries directly to the JST-XH2.54 connector. The cable bridges the gap between the widely used 9 V battery connection and modern development boards that use standardized connectors. The color coding (red for positive, black for negative) makes the polarity self-explanatory and prevents mix-ups during assembly.\u003c\/p\u003e \u003cp\u003eThe 9 V battery supplies 9 volts of DC voltage, which can be connected directly to measurement sensors, relay boards, or other peripherals via the JST-XH2.54 connector. This eliminates the need to wire individual contacts and significantly reduces potential sources of error. The cable uses the standard voltages and connectors long established in hobby electronics and educational projects.\u003c\/p\u003e \u003cp\u003eIn projects, the adapter is often used as a quick power supply for I2C or SPI sensor modules, LED driver boards, or relay circuits. For simple prototypes and field tests, the 9 V battery is suitable as a short-term power source without requiring a separate power supply or power supply module. Operation is designed for typical 200-500 mA loads, such as those found in educational projects.\u003c\/p\u003e \u003cp\u003eThe JST-XH2.54 connector consists of two contacts and requires a mating connector on the receiving end. Depending on the current load and battery type, the 9 V battery can be expected to provide 5 to 10 hours of operation. Separate power supplies or battery packs are preferable for high continuous loads or operation lasting several days.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eReverse polarity can damage connected electronic modules. This cable is intended exclusively for prototypes and testing and development purposes and is not designed for use in or on household electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 9 V battery clip to JST XH2.54\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808107869,"sku":"F23110461","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/batterieclip-9v-block-zu-jst-xh254-funduino-9253319.jpg?v=1791493898"},{"product_id":"steckkabel-jst-xh2-54mm-6p-weiblich-20cm","title":"JST XH connector cable 2.54 mm - 6-pin, female, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with 6-pin JST-XH connector\u003c\/li\u003e \u003cli\u003eFemale socket with open wire end\u003c\/li\u003e \u003cli\u003eWire length 20 cm\u003c\/li\u003e \u003cli\u003eCross-section 0.08 mm²\u003c\/li\u003e \u003cli\u003ePitch 2.54 mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with a female JST-XH socket is used to connect sensors, actuators, and modules to development boards or other devices with a matching connector. The 20 cm-long shield wire is pre-assembled at one end; the other end is open and can be soldered directly or inserted into a connector system.\u003c\/p\u003e \u003cp\u003eJST-XH connectors are widely used in model building, robotics projects, and battery-powered applications. The connector's polarization prevents incorrect installation. With the 2.54 mm pitch, multiple cables can be placed side by side without interfering with one another.\u003c\/p\u003e \u003cp\u003eTo connect the open end, the individual wires are stripped and soldered or crimped. The exact pin assignment and current-carrying capacity should be checked in the target device's documentation, as the cable can be used to power various circuits.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for prototype construction and testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. If you are unsure about the current-carrying capacity or connection type, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x Steckkabel JST XH2.54mm - 6P - Female - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808206173,"sku":"F23106502","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-6p-weiblich-20cm-funduino-9785024.jpg?v=1791493521"},{"product_id":"steckkabel-jst-xh2-54mm-4p-weiblich-20cm","title":"JST XH connector cable 2.54 mm - 4-pin, female, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH2 connector cable, 4-pin, female\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eContacts for 2.5 mm pitch\u003c\/li\u003e \u003cli\u003eConductor cross-section: 0.08 to 0.2 mm²\u003c\/li\u003e \u003cli\u003eSuitable for connecting sensors and actuators with compatible connectors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connecting cable with a female JST-XH2 connector connects sensor and actuator modules with a 4-pin connection. The 20 cm cable fits standard male counterparts with a 2.5 mm pitch and accommodates conductors from 0.08 to 0.2 mm².\u003c\/p\u003e \u003cp\u003eIn prototype setups, the connector eliminates the need to solder individual connections and enables quick reconfiguration. The standardized connector design according to the JST standard ensures reliable contact without the risk of confusion, provided the target system's pin assignment is known.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect battery management modules to charging electronics, transmit signals between controller boards and multi-channel sensor arrays, or connect multi-channel LED drivers to RGB modules. It is also commonly used to connect LiPo batteries to balancer boards, where the 4-pin version monitors individual cell voltages.\u003c\/p\u003e \u003cp\u003eA compatible male JST-XH2 connector is required on the target side. Different connectors are required for other pin counts or pitches.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThis connecting cable is intended exclusively for prototyping, testing, and development purposes. When working with batteries or rechargeable batteries, correct polarity must be observed to prevent short circuits and damage.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST XH 2.54 mm connector cable - 4P – Female - 20 cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997808238941,"sku":"F23107017","price":1.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-4p-weiblich-20cm-funduino-4400554.png?v=1791494571"},{"product_id":"xt60ew-m-panel-mount-steckverbinder-3-5-mm-vergoldete-kontakte-2-polig","title":"XT60EW-M panel-mount connector - 2-pole, 3.5 mm, 20 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003ePanel-mount connector for battery and power supply lines\u003c\/li\u003e \u003cli\u003ePanel-mount design with flange and two screw holes for installation in enclosure walls\u003c\/li\u003e \u003cli\u003e2-pin with 3.5 mm contact pins, gold-plated\u003c\/li\u003e \u003cli\u003eRated current 20 A, up to 40 A briefly at 500 V DC\u003c\/li\u003e \u003cli\u003eHigh-temperature-resistant nylon housing with brass contacts\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis panel-mount connector expands the XT60 system with a variant for fixed enclosure feedthroughs. The flange with two screw holes enables rigid mounting in front panels or enclosure walls, while the contact pins protrude from the opening and serve as the mating side for external cables or batteries. Wires can be soldered to the rear, allowing internal and external wiring to be combined through this connector.\u003c\/p\u003e \u003cp\u003eThe housing is made of high-temperature-resistant nylon, while the gold-plated brass contacts ensure low contact resistance and corrosion resistance. With a rated voltage of 500 V DC and a continuous current of 20 A (40 A briefly), the connector is suitable for power supplies with higher power requirements. The contact resistance of 0.6 mΩ keeps heat losses to a minimum, while the operating temperature range from -20 °C to 120 °C covers typical operating conditions.\u003c\/p\u003e \u003cp\u003eThis connector type is primarily used in RC models, multicopters, and drones for connecting batteries and motors, as well as in aircraft models and 3D printers as a standardized quick connector for power supply lines. For installation, two M2.5 screws (typically 12 mm long) are inserted through the flange holes. A compatible XT60 mating connector is required for use; when installing in metal enclosures, electrical clearances should be observed to prevent short circuits.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis connector is intended only for wiring DC systems in model building, prototyping, and development applications, not for installation in household electrical systems. Work on or near high-current wiring may only be performed by qualified electricians; if you have questions about safe installation or load capacity, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1× XT60EW-M 3.5 mm gold-plated panel-mount connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997819674973,"sku":"F23105813","price":1.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60ew-m-panel-mount-steckverbinder-35-mm-vergoldete-kontakte-2-polig-funduino-8341503.png?v=1791474057"},{"product_id":"xt90h-f-stecker-mit-lotfahne-und-abdeckung","title":"XT90H-F high-current connector - socket with solder tab, cover, 90 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT90H F plug with female contact\u003c\/li\u003e \u003cli\u003eSolder tab for direct PCB mounting\u003c\/li\u003e \u003cli\u003eCover to prevent short circuits\u003c\/li\u003e \u003cli\u003eCurrent carrying capacity of up to 90 A\u003c\/li\u003e \u003cli\u003eGold-plated contacts for a secure connection\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT90H F is a high-current connector with a female contact, designed for applications with up to 90 A. The solder tab enables direct installation on printed circuit boards without additional cable ends, eliminating material and assembly effort.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts ensure low contact resistance and reliable current transmission, even with frequent plugging and unplugging. The cover reliably protects the connector against accidental contact and short circuits during storage and transport.\u003c\/p\u003e \u003cp\u003eThis connector system is used in high-performance battery packs for model making and robotics, in high-current battery management systems, and in portable power supplies with power requirements starting at around 50 A. Typical applications include LiPo battery packs for unmanned aerial vehicles and cordless tools.\u003c\/p\u003e \u003cp\u003eThe solder tab requires suitable soldering equipment, as the power contacts conduct significant amounts of heat. The connector is compatible only with matching XT90 sockets and is not supplied with an adapter cable.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cover must be removed before plugging in the connector. Soldering work must be carried out carefully to avoid damaging the insulating material. When used in high-current systems, work on electrical circuits must be performed by qualified electricians; if you are unsure about safe wiring, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT90H-F connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997819707741,"sku":"F23107737","price":2.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt90h-f-stecker-mit-loetfahne-und-abdeckung-funduino-6236379.jpg?v=1791474095"},{"product_id":"kabel-mit-jst-xh2-54-stecker-3p-400mm-a-b-26awg-gedreht","title":"JST XH2.54 connection cable, 3-pin - 400 mm, 26 AWG, twisted","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with JST-XH2.54 connectors on both ends\u003c\/li\u003e \u003cli\u003eThree wires in red, yellow, and black, 26 AWG copper wire\u003c\/li\u003e \u003cli\u003eCable length 400 mm, pitch 2.54 mm\u003c\/li\u003e \u003cli\u003eOuter wires crossed (twisted) between the connectors\u003c\/li\u003e \u003cli\u003eSuitable for JST-XH2.54 sockets on circuit boards and expansion modules\u003c\/li\u003e \u003cli\u003eConnection without soldering, easy to connect and disconnect\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with JST-XH2.54 connectors connects two sockets via three color-coded insulated wires. The 26 AWG conductor size enables reliable power transmission under low to medium current loads. The 2.54 mm pitch corresponds to the standard used by many pin headers on microcontroller boards and expansion modules.\u003c\/p\u003e \u003cp\u003eThe cable's special feature is the twisted routing of the two outer wires. While the middle (yellow) wire remains in the same position at both ends, the red and black wires are swapped between the connectors. This is required when two sockets are oriented relative to each other in such a way that a straight connection would reverse the polarity, for example on expansion boards for Calliope systems or similar circuit boards where the sockets are arranged as mirror images.\u003c\/p\u003e \u003cp\u003eThe pre-assembled connectors provide a ready-to-use connection without soldering. The color coding of the wires helps identify the individual contacts. The cable can be disconnected and reconnected at any time, simplifying repeated reconfigurations of setups.\u003c\/p\u003e \u003cp\u003eUse requires JST-XH2.54 sockets on the circuit boards or modules to be connected. The 400 mm length is suitable for short to medium distances between sockets on a board or between adjacent modules. This cable is not suitable for longer distances or other connector types.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes. Incorrect polarity of the power supply or signals can damage connected modules. The compatibility of the connectors should be checked before connecting.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable with JST XH2.54 connector 3P 400mm A-B 26AWG twisted\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997824557405,"sku":"F23110344","price":0.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kabel-mit-jst-xh254-stecker-3p-400mm-a-b-26awg-gedreht-funduino-9783015.png?v=1791494687"},{"product_id":"steckkabel-jst-xh2-54mm-5p-mannlich-20cm","title":"JST-XH connector cable 2.54 mm - 5-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with 5-pin JST-XH2 connectors, male to male\u003c\/li\u003e \u003cli\u003eCable length: 200 mm\u003c\/li\u003e \u003cli\u003eContacts and housings fully assembled\u003c\/li\u003e \u003cli\u003eReady to connect batteries, power supplies, and sensors\u003c\/li\u003e \u003cli\u003eIdentical connectors on both ends, eliminating the need for adapter cables\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connection cable directly connects modules and components with JST-XH2 connectors. The male contacts fit into the female sockets of this widely used connector system. Both ends have identical curved connectors, making it easier to build prototype circuits by eliminating adapters between different connector types.\u003c\/p\u003e \u003cp\u003eWith a length of 200 mm, the cable fits into compact housings and tight spaces without being so short that it is only useful when modules are directly adjacent. The pre-assembled contacts are securely seated in the connectors and enable reliable connections without soldering.\u003c\/p\u003e \u003cp\u003eTypical applications include supplying power from battery packs to motor controllers, connecting sensor modules to development boards, expanding robotics kits, or building prototypes in laboratory technology. The cable serves as a standard connection wherever JST-XH2 sockets are already present on the connected components.\u003c\/p\u003e \u003cp\u003eNo further preparation is required for operation. Before making the connection, users should check that the source device and load are designed for the same operating voltage; the voltage rating depends on the connected components.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eConfusing voltage levels can damage modules or batteries. When building prototypes and development setups, ensure that all connected components operate at the same voltage. This cable is intended exclusively for prototypes as well as testing and development purposes and is not suitable for use in household electrical circuits.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* JST XH2.54\u0026nbsp;mm 5-pin cable - male - 20\u0026nbsp;cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997825147229,"sku":"F23107011","price":1.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-5p-maennlich-20cm-funduino-2344313.png?v=1791493603"},{"product_id":"xt60-fassung-und-stecker-mit-lotfahne-male-und-female","title":"XT60 plug and socket - solder tabs, 60 A, 6-50 V DC","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 plug and socket with solder tabs for high-current DC connections\u003c\/li\u003e \u003cli\u003eRated current up to 60 A\u003c\/li\u003e \u003cli\u003eVoltage range 6 to 50 V DC\u003c\/li\u003e \u003cli\u003eGold-plated contacts to prevent oxidation\u003c\/li\u003e \u003cli\u003eColor coding distinguishes male and female\u003c\/li\u003e \u003cli\u003eInterlocking Bakelite housing\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe XT60 plug is a high-current DC connector with solder tabs, widely used for battery power supplies and power distribution in model building, robotics, and portable energy systems. The plug-and-socket pair, with a rated current of up to 60 A, enables secure connections in the voltage range from 6 to 50 V DC. The gold-plated contacts resist corrosion and maintain low contact resistance, reducing heat losses at high currents.\u003c\/p\u003e \u003cp\u003eWhen soldering, the tabs are connected to the power supply wire, and the plugs and sockets can then be connected. The interlocking Bakelite housing prevents mix-ups and prevents unintentional connection. The red color identifies the male version, while black sockets indicate the female version. This color differentiation prevents polarity errors in multipole systems.\u003c\/p\u003e \u003cp\u003eThe plug-and-socket system replaces fixed wiring in assemblies with pluggable quick connections, such as when replacing energy storage units, in modular drive systems, or when combining voltage sources in development environments. Projects with multiple parallel power-consuming circuits benefit from the protection against short circuits provided by the locking mechanism.\u003c\/p\u003e \u003cp\u003eA soldering station and solder are required; when soldering multi-core power cables, their cross-section should be at least 2.5 to 4 mm² to achieve the permissible current-carrying capacity. XT60 mating connectors are available from specialist retailers and fit seamlessly into existing inventories thanks to their standardized geometry.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eHigh-current connectors require proper wiring and correct soldering. Not intended for installation in household electrical circuits. The product is intended exclusively for building prototypes and for testing and development purposes. Work in the immediate vicinity of electrical installations is reserved for qualified electricians; if you have questions about integrating the product into existing systems, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997841170781,"sku":"F23108752","price":1.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-fassung-und-stecker-mit-loetfahne-male-und-female-funduino-6046717.jpg?v=1791494702"},{"product_id":"micro-usb-kabel-90-grad-rechtwinklig-30cm-schwarz","title":"Micro-USB cable - 30 cm, 90-degree right-angle, black","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eMicro USB cable with a right-angle connector, 30 centimeters long\u003c\/li\u003e \u003cli\u003eAngled connector saves space and prevents strain\u003c\/li\u003e \u003cli\u003eBlack sheath\u003c\/li\u003e \u003cli\u003eFor mobile devices and microcontroller boards with a Micro USB port\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe 90-degree Micro USB cable connects power sources or data interfaces to devices where a straight cable would waste space or put strain on the USB port. The angled connector allows the cable to run parallel to the device surface instead of protruding perpendicularly.\u003c\/p\u003e \u003cp\u003eIn tight enclosures, on laboratory boards, or in mobile projects, the right-angle design significantly reduces bending and strain at the connector. The 30-centimeter cable is long enough for typical distances between a power supply or development computer and the connected device. It can be used wherever Micro USB connections are needed without additional adapters and the space-saving design provides a practical benefit.\u003c\/p\u003e \u003cp\u003eThe connection is made using standard Micro USB plugs and sockets, ensuring full compatibility with all common boards and mobile devices featuring this port. The cable is suitable for data transfer or power supply of up to 2 amperes without further restrictions.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for connecting development and testing devices. The power supply must be suitable for the connected device; the required voltage and current must be checked before commissioning. Any damage to the insulation or connector requires immediate replacement.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Micro USB cable - 90-degree right-angle, 30cm, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997843628381,"sku":"F23109083","price":1.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/micro-usb-kabel-90-grad-rechtwinklig-30cm-schwarz-funduino-2885484.png?v=1791493675"},{"product_id":"40-poliges-breadboardkabel-flachbandkabel-jumper-kabel-3m-rolle","title":"40-Pin Breadboard Cable - ribbon cable, 3 m roll","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40-conductor ribbon cable with connector for breadboard connections\u003c\/li\u003e \u003cli\u003eEnables connections between controller boards and breadboards over greater distances\u003c\/li\u003e \u003cli\u003ePlugs together without soldering and is ready for immediate use\u003c\/li\u003e \u003cli\u003eColor coding of the individual conductors for reliable identification\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eA 40-conductor ribbon cable connects controller boards and breadboards without soldering. The connector fits directly onto standard header strips, while the individual conductors can be inserted into the breadboard rows. This eliminates time-consuming wiring with individual wires.\u003c\/p\u003e \u003cp\u003eThe color coding of each conductor makes it easy to assign signals and avoid incorrect connections. For operation, the cable only needs to be plugged in; no calibration or programming is required. The 40 conductors make it possible to wire multiple circuits in parallel or connect all pins of a common controller board at once.\u003c\/p\u003e \u003cp\u003eThe cable is typically used when building prototype circuits with breadboards, especially when the hardware components need to be physically separated. It is also practical for measurement applications where various sensors are controlled simultaneously from the board. It is equally useful for test and development projects that require frequent rewiring.\u003c\/p\u003e \u003cp\u003eDepending on the version, the cable length must match the distance between the board and breadboard. Interference may occur with very long connections spanning several meters; in such cases, a shorter cable or a shielded cable should be used.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe ribbon cable is intended exclusively for building prototypes and for testing and development purposes. It must not be installed in electrical systems. Before commissioning, verify that all connections are properly seated and that the connected components are compatible with the controller board's operating voltage; if in doubt, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e3-meter, 40-pin breadboard cable, jumper cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997846282589,"sku":"F23107213","price":7.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-poliges-breadboardkabel-flachbandkabel-jumper-kabel-3m-rolle-funduino-3440742.png?v=1791493201"},{"product_id":"usb-c-kabel-auf-usb-c-100cm-schwarz","title":"USB-C cable - 100 cm, Type C on both ends, black","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eUSB-C cable with USB-C connectors at both ends\u003c\/li\u003e \u003cli\u003eSymmetrical connectors, can be used in either orientation\u003c\/li\u003e \u003cli\u003eCable length: 100 cm\u003c\/li\u003e \u003cli\u003eColor: black\u003c\/li\u003e \u003cli\u003eConnects USB-C devices for data transfer\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis USB-C cable connects two USB-C-compatible devices. Since both ends have identical connectors, the cable can be connected from either side. The symmetrical design of the connectors allows use in any orientation, eliminating the need to try turning the connector around.\u003c\/p\u003e \u003cp\u003eWith a length of 100 centimeters, the cable easily bridges larger distances between devices. For example, it can connect a mobile device on a desk to a printer or external hard drive placed beside it or slightly higher up.\u003c\/p\u003e \u003cp\u003eThe cable is suitable for data transfer between computers and peripherals as well as for smartphone-to-device connections. The black fabric fits into most environments.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes and is not intended for installation in household electrical systems. If the plug or insulation is damaged, check the cable before use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* USB-C cable to USB-C - 100cm, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997854212445,"sku":"F23109041","price":2.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/usb-c-kabel-auf-usb-c-100cm-schwarz-funduino-9029059.png?v=1791494097"},{"product_id":"idc-flachbandkabel-fc-typ-a-20-polig-2x10-2-54mm-10cm","title":"IDC ribbon cable FC Type A - 20-pin, 2x10, 2.54 mm, 10 cm","description":"\u003cdiv class=\"flex flex-col text-sm pb-25\"\u003e \u003cdiv class=\"text-base my-auto mx-auto pb-10 [--thread-content-margin:--spacing(4)] @w-sm\/main:[--thread-content-margin:--spacing(6)] @w-lg\/main:[--thread-content-margin:--spacing(16)] px-(--thread-content-margin)\"\u003e \u003cdiv class=\"[--thread-content-max-width:40rem] @w-lg\/main:[--thread-content-max-width:48rem] mx-auto max-w-(--thread-content-max-width) flex-1 group\/turn-messages focus-visible:outline-hidden relative flex w-full min-w-0 flex-col agent-turn\"\u003e \u003cdiv class=\"flex max-w-full flex-col grow\"\u003e \u003cdiv class=\"min-h-8 text-message relative flex w-full flex-col items-end gap-2 text-start break-words whitespace-normal [.text-message+\u0026amp;]:mt-1\" dir=\"auto\" data-message-author-role=\"assistant\" data-message-id=\"60805cee-7622-47c5-86e1-1d6128857b57\" data-message-model-slug=\"gpt-5-2-thinking\"\u003e \u003cdiv class=\"flex w-full flex-col gap-1 empty:hidden first:pt-[1px]\"\u003e \u003cdiv class=\"markdown prose dark:prose-invert w-full break-words light markdown-new-styling\"\u003e \u003cp data-start=\"0\" data-end=\"511\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eThe IDC ribbon cable FC Type A (20-pin, 2x10, 2.54mm, 10cm) is a compact connecting cable for reliable signal and data connections in electronics projects with box headers.\u003c\/p\u003e \u003cp data-start=\"0\" data-end=\"511\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eWith its 2.54mm pitch, it fits standard box headers\/pin headers (e.g., on controllers, adapter boards, or prototype boards).\u003c\/p\u003e \u003cp data-start=\"0\" data-end=\"511\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eThe short cable length of 10cm ensures neat, space-saving cable routing - ideal for device assemblies, internal wiring, and quick test setups in the laboratory or hobby sector \u003c\/p\u003e \u003cp data-start=\"0\" data-end=\"511\" data-is-last-node=\"\" data-is-only-node=\"\"\u003e\u003cstrong\u003ePackage contents\u003c\/strong\u003e: \u003c\/p\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"mt-3 w-full empty:hidden\"\u003e \u003cul\u003e \u003cli\u003e1x IDC ribbon cable FC, Type A, 20-pin, 2.54mm, 10cm \u003c\/li\u003e \u003c\/ul\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003c\/div\u003e \u003cdiv class=\"pointer-events-none h-px w-px absolute bottom-0\" data-edge=\"true\"\u003e \u003c\/div\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997857227101,"sku":"F25110811","price":1.61,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/idc-flachbandkabel-fc-typ-a-20-polig-2x10-254mm-10cm-funduino-6447052.png?v=1791494211"},{"product_id":"xt60-verlangerungskabel-mannlich-zu-weiblich-15-cm","title":"XT60 extension cable - male to female, 15 cm, 60 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eXT60 extension cable with male and female connectors\u003c\/li\u003e \u003cli\u003e15 cm length\u003c\/li\u003e \u003cli\u003efor batteries, chargers, and power consumers with an XT60 connection\u003c\/li\u003e \u003cli\u003ereverse-polarity protected by connector geometry\u003c\/li\u003e \u003cli\u003emaximum permissible current: 60 A\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis extension cable connects XT60 connectors and improves access to batteries and charger modules. The 15 cm length creates space between the power source and the consumer without adding too much weight or taking up too much space. The XT60 standard is widely used in model making, multicopter electronics, and portable power supplies.\u003c\/p\u003e \u003cp\u003eThe reverse-polarity-protected connectors prevent incorrect connections that could cause damage. The cable supports up to 60 A, making it suitable for high-current applications such as brushless motors or multiple consumers operated in parallel. The copper core with a plastic sheath combines flexibility with durability.\u003c\/p\u003e \u003cp\u003ePossible applications are varied: positioning the battery and controller farther apart in a quadcopter; making the charging socket on RC models easier to reach; combining multiple power sources via distribution boards; and powering test and development setups with a standardized connector. The cable also relieves strain on long connection paths when batteries are stored externally or on a stand.\u003c\/p\u003e \u003cp\u003eOnly a matching connector on the consumer or power source is required for use. The cable does not replace defective connectors and must not be stored uninsulated when both connection ends are unused, as there is a risk of short circuits.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eShort-term short circuits can discharge and overheat the battery. The cable is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations is reserved for qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x XT60 extension cable - male to female, 15 cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997859193181,"sku":"F23108933","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt60-verlaengerungskabel-maennlich-zu-weiblich-15-cm-funduino-7081266.jpg?v=1791493218"},{"product_id":"xt30-fassung-und-stecker-mit-lotfahne-male-und-female","title":"XT30 connectors - male and female with solder tabs, 15 A","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnector pair (plug and socket) for high-current applications\u003c\/li\u003e \u003cli\u003eConnection by soldering; crimping is not required\u003c\/li\u003e \u003cli\u003e2 gold-plated contacts per part\u003c\/li\u003e \u003cli\u003eReverse-polarity protected through a form-fitting connector mechanism\u003c\/li\u003e \u003cli\u003eRated current 15 A, 30 A for short periods\u003c\/li\u003e \u003cli\u003ePolyamide housing, temperature-resistant up to 120 °C\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe XT30 connector pair consists of a plug and socket, each with two gold-plated contacts designed as solder tabs. Soldering directly to the cable is not necessary, and no crimping tool is required. The gold plating keeps contact resistance low and protects the contacts against oxidation.\u003c\/p\u003e \u003cp\u003eThe form-fitting geometry permits only one connection direction, preventing reverse polarity. The polyamide housing holds the two parts together after connection through its shape alone, without additional locking, and retains its shape during soldering.\u003c\/p\u003e \u003cp\u003eThe connector is designed for a continuous current of 15 A; short-term loads of up to 30 A are possible. This makes it the standard for connecting batteries to motors and electronic speed controllers in RC models, small robots, and LED installations. The operating temperature range from minus 20 to 120 degrees Celsius ensures safe connections even when heat is generated.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen soldering, safety guidelines for soldering work must be observed. This product is intended exclusively for building prototypes and for testing and development purposes. If you have questions about current capacity or use in electrical systems, consult a qualified electrician before commissioning.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997860405597,"sku":"F23108599","price":1.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/xt30-fassung-und-stecker-mit-loetfahne-male-und-female-funduino-2407100.jpg?v=1791493233"},{"product_id":"jst-xh2-54-male-zu-dupont-male-kabel-3p-24awg-150cm","title":"JST-XH2.54 to DUPONT adapter cable - 3-pin, 24 AWG, 150 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with JST-XH2.54 plug to 3-pin DUPONT female connector\u003c\/li\u003e \u003cli\u003e24 AWG conductors for currents of up to approximately 3 A per wire\u003c\/li\u003e \u003cli\u003e150 cm length\u003c\/li\u003e \u003cli\u003eMolded connector heads for increased durability\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis adapter cable connects devices and modules with JST-XH2.54 connectors to development boards and sensors with DUPONT connectors. The three 24 AWG conductors transmit signals and power without soldering. The cable bridges compatibility gaps between two widely used connector systems.\u003c\/p\u003e \u003cp\u003eThe JST-XH2.54 side fits into compact connectors, while the DUPONT side fits the standard pin headers on microcontroller boards and experimental shields. The 24 AWG conductor can safely carry up to approximately 3 A per wire, making it suitable for signal lines and low to moderate power supply applications. Molded connector heads improve resistance to twisting and reduce loose contacts.\u003c\/p\u003e \u003cp\u003eThe cable can be used wherever sensors or actuators with JST connectors need to be connected to boards fitted with DUPONT connectors, for example when operating humidity or air quality sensors on standard development boards. It can also be used to connect battery pack connectors to charge controllers with DUPONT outputs, without requiring new wiring.\u003c\/p\u003e \u003cp\u003eThe 150 cm length allows flexible routing in project assemblies. No additional components are required; the cable is ready for immediate use. However, permanent installations in fixed assemblies require sufficient space in the housing.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eAt currents exceeding 3 A per wire, heat generation increases noticeably; higher currents require thicker conductors or parallel cables. This cable is intended only for prototyping and development. It is not permitted for use in permanent household electrical installations.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997860864349,"sku":"F23106520","price":1.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-xh254-male-zu-dupont-male-kabel-3p-24awg-150cm-funduino-8732003.png?v=1791493244"},{"product_id":"jst-xh2-54-male-zu-dupont-female-kabel-4p-24awg-150cm","title":"JST-XH to DuPont adapter cable - 4-pin, 2.54 mm, 24 AWG","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable with JST-XH2.54 male plug to DUPONT female socket\u003c\/li\u003e \u003cli\u003e4 individual wires, each 15 cm long\u003c\/li\u003e \u003cli\u003e24 AWG cross-section (approx. 0.2 mm²)\u003c\/li\u003e \u003cli\u003eConnection between JST-XH- and DuPont-compatible connectors without rewiring\u003c\/li\u003e \u003cli\u003eColor-coded wires for polarity\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe adapter cable connects JST-XH connector systems with DuPont sockets, as commonly used on microcontroller boards and sensor modules. Rewiring is not necessary when the sensor or actuator is equipped with one connector system and the target board with the other.\u003c\/p\u003e \u003cp\u003eThe four separately insulated wires enable the connection of a complete functional group, such as the power supply and signal line for a sensor. The color coding allows the correct polarity to be quickly checked against the circuit diagram. With 24 AWG, the wires are suitable for current draws of up to approximately 1 A per wire, which is sufficient for sensors, small servos, and control signals.\u003c\/p\u003e \u003cp\u003eThe cable is useful in laboratory setups where different boards and sensor modules are combined, for example when connecting a DuPont-compatible sensor to a JST-XH-equipped actuator module, prototyping with several boards from different manufacturers, or testing sensors before final soldering. With 15 cm per wire, the wiring remains clear and can be arranged in confined spaces.\u003c\/p\u003e \u003cp\u003eBefore plugging in, check that the plug and socket are mechanically compatible and that the contacts are not damaged. For continuous operation, the cable should be mechanically secured to prevent wear caused by repeated plugging and unplugging.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe maximum current draw per wire is limited to approximately 1 A; a cable with a larger cross-section is required for higher demands. The cable is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997864501597,"sku":"F23108735","price":2.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/jst-xh254-male-zu-dupont-female-kabel-4p-24awg-150cm-funduino-3686872.png?v=1791493767"},{"product_id":"steckkabel-jst-xh2-54mm-6p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 6-pin, male, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH-2 connector cable (6-pin, male connector) with a 20 cm cable length\u003c\/li\u003e \u003cli\u003eFlat connector housing with secure locking by means of a clip closure\u003c\/li\u003e \u003cli\u003eStandardly used in battery packs, drone battery management systems, and charge controllers\u003c\/li\u003e \u003cli\u003eIndividual wires shielded against interference\u003c\/li\u003e \u003cli\u003ePre-assembled and ready for use without soldering or crimping\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe connector cable with a JST-XH-2 connection links power sources such as battery packs or charge controllers to electronic systems. The male 6-pin connector fits female JST-XH-2 sockets, which are widely used in drone flight controllers, multicopter controllers, and battery management systems.\u003c\/p\u003e \u003cp\u003eThe connector's clip closure prevents accidental disconnection. The 2 mm pin spacing enables compact connection blocks, which is particularly important in space-constrained drones and model vehicles. With a length of 20 cm, the cable can be routed between spatially separated components without creating unnecessary cable loops.\u003c\/p\u003e \u003cp\u003eTypical applications include lithium-polymer battery packs with battery management systems in quadcopters, connecting a current measurement module between the controller and drive in multicopters, or supplying signals to model-building power distribution boards. In laboratories and workshops, the cable is used to set up test configurations with modular power supply components.\u003c\/p\u003e \u003cp\u003eThe cable is pre-assembled and requires neither soldering nor crimping. It is important to check the pin sequence when connecting it for the first time to prevent short circuits. The maximum current capacity depends on the conductor cross-section and is typically several amperes, but should be checked in the data sheet of the connected controller.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eReverse polarity can damage the connected device; check the pin sequence before connecting. The cable is intended exclusively for prototypes and testing and development purposes and is not designed for operation on household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm connector cable - 6 P - Male - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997865222493,"sku":"F23108545","price":1.06,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-6p-maennlich-20cm-funduino-9599993.jpg?v=1791493252"},{"product_id":"grove-jumperkabel-4p-mannlich-auf-4p-grove-5er-set","title":"Grove jumper cable - 4P male to female, set of 5","description":"\u003ch2\u003eGrove Conversion Cable\u003c\/h2\u003e \u003cp\u003eGrove is a plug-and-play system with a special interface that can also be used in open systems such as breadboards. The specially developed conversion cables enable the comprehensive Grove system to be integrated into breadboards or other microcontrollers without a compatible Grove Base Shield.\u003c\/p\u003e \u003cp\u003eGrove makes connecting and experimenting easier and simplifies the prototyping process. No jumpers or soldering are required. More than 300 Grove modules have been developed, covering a wide range of applications and meeting a variety of requirements. Not only the hardware but also the software is open source.\u003c\/p\u003e \u003cp\u003eThis conversion cable is recommended for hobbyists working with Raspberry Pi, Cubieboard, or BeagleBone who want to benefit from Grove. For Arduino or Arduino Mega, the Grove - Base Shield offers a more direct and practical solution.\u003c\/p\u003e \u003ch3\u003eTechnical details\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eWeight: 18 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePackage contents:\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e5x Grove - jumper cable, 4P male to 4P Grove\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e \u003c\/p\u003e","brand":"Seeedstudio","offers":[{"title":"Default Title","offer_id":65997866303837,"sku":"F23107257","price":1.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/grove-jumperkabel-4p-maennlich-auf-4p-grove-5er-set-funduino-7260074.jpg?v=1791493281"},{"product_id":"ph2-0-3p-steckverbindung","title":"PH2.0 Connector - JST system, 3-pin","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e3-pin connector for low-voltage applications\u003c\/li\u003e \u003cli\u003eOperating voltage up to 250 V AC\u003c\/li\u003e \u003cli\u003eCurrent-carrying capacity up to 16 A\u003c\/li\u003e \u003cli\u003eContact design for reliable connections\u003c\/li\u003e \u003cli\u003eCompatible with standard devices and control cabinets\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThe PH2 0 3P is a 3-pin connector for safely connecting electrical loads to power sources in the low-voltage range. The connection supports up to 16 A at operating voltages of up to 250 V AC, making it suitable for household appliances, office equipment, and smaller industrial devices.\u003c\/p\u003e \u003cp\u003eThe three pins enable the safe transmission of three-phase AC voltage or the simultaneous switching of up to three independent circuits. Gold-plated contacts ensure long-term stability and prevent corrosion at the interfaces.\u003c\/p\u003e \u003cp\u003eTypical applications include powering heaters, kitchen appliances, workshop equipment, and expansion modules in laboratory setups. In development projects, the connector enables rapid test setups without soldering or loosening terminals.\u003c\/p\u003e \u003cp\u003eThe connection requires a compatible counterpart, either a matching plug or a corresponding socket header. For outdoor applications or use in damp conditions, ensure that a suitably protected version is used.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis connector is not intended for installation in household mains circuits and is intended exclusively for building prototypes and for testing and development purposes. Work on or near electrical installations must be carried out by qualified electricians. When operating with voltages of 50 V AC or higher, protective measures against contact must be observed; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x PH2.0 - 3P connector\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997870891357,"sku":"F23106732","price":0.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/ph20-3p-steckverbindung-funduino-2244989.png?v=1791494259"},{"product_id":"steckkabel-jst-xh2-54mm-5p-weiblich-20cm","title":"JST XH Connector Cable - 5-pin, 2x female, 2.54 mm, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable with female JST XH 5P connectors at both ends\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eCross-sectional area: 0.2 mm² per conductor\u003c\/li\u003e \u003cli\u003eFor 5-pin battery and power supply connectors\u003c\/li\u003e \u003cli\u003ePitch: 2.54 mm (standard pitch)\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable connects two 5-pin JST XH connectors and is typically used to supply power to battery holders, battery packs, or power supplies with receiver or controller boards. The 2.54 mm pitch is standard for drone power distribution boards, LiPo chargers, and similar systems.\u003c\/p\u003e \u003cp\u003eAt 20 cm long, the cable offers sufficient flexibility for compact setups without creating unnecessary excess cable length. The 0.2 mm² cross-sectional area is designed for currents of up to approximately 2 A, making it suitable for small batteries, LED driver boards, or sensor power supplies in hobby applications. The female connectors at both ends allow connection to male plugs, but make direct connection to solder pads or bare wire ends more difficult.\u003c\/p\u003e \u003cp\u003eThe cable is used in drone builds as well as battery-powered robots, portable measuring devices, and prototype power distribution systems. It is also suitable for extending power cables that are too short or for flexibly switching between different power sources.\u003c\/p\u003e \u003cp\u003eIt can only be used when both connection sides have JST XH female connectors. Longer cables or other connectors must be sourced separately. For higher continuous currents (above 2 A), thicker wires should be used to prevent voltage drops and overheating.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. When connecting it to power sources, ensure correct polarity to prevent damage to connected devices. If anything is unclear, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm jumper cable - 5P - Female - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997877936477,"sku":"F23108484","price":1.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-5p-weiblich-20cm-funduino-2117018.jpg?v=1791493798"},{"product_id":"adapterkabel-fur-stromversorgung-y-adapter-mit-5-5-2-1mm-dc-stecker","title":"Y-Adapter Cable for Power Supply - DC 5.5 x 2.1 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eY-adapter for power supply with five connection options\u003c\/li\u003e \u003cli\u003eEnables parallel power supply for multiple modules or devices\u003c\/li\u003e \u003cli\u003eReduces the number of separate power cables required\u003c\/li\u003e \u003cli\u003eRobust plug connections with secure retention\u003c\/li\u003e \u003cli\u003eSuitable for prototype construction and test circuits\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis Y-adapter connects one power supply to up to five different consumers in parallel. This saves space when wiring setups with multiple power-hungry modules or sensors.\u003c\/p\u003e \u003cp\u003eAll five outputs are supplied simultaneously with the same voltage and current from the single input socket. This significantly reduces the number of power cables required without the need to use separate power supplies for each module. This greatly simplifies wiring, especially in projects with many components operating in parallel.\u003c\/p\u003e \u003cp\u003eThe adapter can be used when setting up sensor networks in which multiple measurement modules are powered simultaneously, or in robot prototypes with many drives connected in parallel. It also saves handling effort in test setups with various expansion boards and reduces potential sources of error caused by too many cable connections.\u003c\/p\u003e \u003cp\u003eThe power supply must provide sufficient total power for all five connected consumers. When using high-current components, the available current of the power supply should be checked to avoid overloading. The plug connections must be loaded correctly to ensure safe operation.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe adapter is not suitable for connection to the mains supply and may only be used for building prototypes and for testing and development purposes. Before commissioning, check that the connected power supply does not exceed the total power rating of all four modules. If you are unsure about electrical connections, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* power supply adapter cable - Female to Male, with 5.5*2.1mm DC plug\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997882523997,"sku":"F23106148","price":1.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/adapterkabel-fuer-stromversorgung-y-adapter-mit-5521mm-dc-stecker-funduino-6925024.jpg?v=1791493830"},{"product_id":"40-stuck-breadboardkabel-weiblich-mannlich-50cm","title":"Female-to-male breadboard wires - 40 pieces, 50 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cables for breadboard circuits, 40 pieces\u003c\/li\u003e \u003cli\u003eLength: 50 cm, female-to-male connector type\u003c\/li\u003e \u003cli\u003eFor standard breadboards and IC connections\u003c\/li\u003e \u003cli\u003eMulticolored for organized wiring\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eBreadboard connection cables with female connectors on one end and male connectors on the other enable sensors, actuators, and microcontrollers to be wired to through-hole components. With a length of 50 cm, they can also connect points that are farther apart on the board in larger setups without the cables becoming too tightly arranged. The package contains 40 pieces in different colors, making it easy to visually distinguish related or functionally different signal groups.\u003c\/p\u003e \u003cp\u003eThe mixed connector type, with a female end for breadboard fields and a male end for IC pin headers or direct solder pads, is the standard connection for linking development modules to breadboard setups. The sufficient quantity of 40 cables covers typical projects in which prototypes with multiple components are built or rearranged in parallel.\u003c\/p\u003e \u003cp\u003eApplications include projects with Arduino, Raspberry Pi, or other standard microcontrollers, where modular circuits are tested on breadboards, as well as introductory electronics learning projects with discrete components and prebuilt sensor modules. For larger setups or intensive use, keeping an additional supply may be useful, as contacts can wear out through repeated insertion.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThese cables are intended exclusively for prototyping as well as testing and development purposes and are not suitable for installation in household electrical circuits. When working on or near electrical installations, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e40x female\/male breadboard cables (50cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997934788957,"sku":"F23106468","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-weiblichmaennlich-50cm-funduino-8322745.png?v=1791495005"},{"product_id":"40-stuck-breadboardkabel-mannlich-weiblich-30cm","title":"Male-to-female breadboard wires - 40 pieces, 30 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40 jumper wires for breadboards and prototyping\u003c\/li\u003e \u003cli\u003eLength: 30 cm, different connectors on each end (male\/female)\u003c\/li\u003e \u003cli\u003eEnable flexible connections between components and test setups without soldering\u003c\/li\u003e \u003cli\u003eColor-coded insulation for improved clarity\u003c\/li\u003e \u003cli\u003eDesigned for voltages up to 5 V and currents up to 1 A\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese 40 jumper wires connect components on breadboards and in test setups. Each wire is 30 cm long and has a male connector on one end and a female connector on the other, making them suitable for different connector types. The different ends enable circuits to be assembled directly without additional adapters.\u003c\/p\u003e \u003cp\u003eThe color-coded insulation of the 40 wires helps identify connections quickly and locate potential sources of errors in circuit setups. The 30 cm length is sufficient for typical laboratory setups without making the wires unnecessarily long or wasting space on the breadboard.\u003c\/p\u003e \u003cp\u003eApplications include microcontroller projects on breadboards, sensor connections for experiments, power supply lines between boards and power sources, and connection setups during circuit development. For example, a beginner can use them to connect a temperature sensor to an Arduino-compatible board or supply power to various modules from a central 5 V source.\u003c\/p\u003e \u003cp\u003eThe wires are designed for voltages up to 5 V and currents up to 1 A, which is sufficient for prototyping with common single-board computers and microcontrollers. Higher loads or mains voltage require other connection methods.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThese wires are intended exclusively for assembling prototypes and for testing and development purposes on breadboards. Use in household electrical installations or with mains voltage is not permitted. When working near electrical installations, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/female breadboard wire set (30cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997938819421,"sku":"F23107198","price":1.87,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichweiblich-30cm-funduino-8791383.png?v=1791496239"},{"product_id":"10x-jumper-kabel-mit-krokodilklemmen-female-22cm","title":"Jumper wires with alligator clips - 10 pieces, 22 cm, female","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eTen connection cables with female crocodile clips, each 22 cm long\u003c\/li\u003e \u003cli\u003eFlexible wires enable secure contacts on metal surfaces and connection pins\u003c\/li\u003e \u003cli\u003eFor assembling test and prototype circuits\u003c\/li\u003e \u003cli\u003eReusable multiple times thanks to spring-loaded clamping jaws\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThese cables with crocodile clips quickly connect power supplies, sensors, and actuators to test points. The female clips grip metal surfaces and individual pins, while the wires adapt to the surface and create secure electrical contacts without soldering.\u003c\/p\u003e \u003cp\u003eThe 22-centimeter wire is easy to bend and route in confined spaces on the test board. The spring-loaded jaws hold the contact securely when reused without damaging the connected components. This eliminates the need for soldering during development.\u003c\/p\u003e \u003cp\u003eTypical use cases include quickly setting up voltage tests, temporarily connecting probes to boards, testing servo circuits, and flexibly distributing power on laboratory breadboards. Prototype circuits can be modified and rebuilt within minutes.\u003c\/p\u003e \u003cp\u003eDuring operation, ensure sufficient contact area, as crocodile clips touch at only one point. The wires should not remain energized for extended periods if both clips are not positioned at the intended points of use. Soldered connections are preferable for continuous operation.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eShort connections between the clips can cause short circuits. When working with higher voltages, ensure that the clips do not accidentally touch adjacent contacts. These cables are intended exclusively for prototyping and testing, not for use in or near household electrical installations. Work on high-voltage circuits must be carried out by a qualified electrician; if in doubt, seek advice before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1*  10x Jumper cables with crocodile clips, female, 22cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997938884957,"sku":"F23107176","price":3.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/10x-jumper-kabel-mit-krokodilklemmen-female-22cm-funduino-9919211.png?v=1791495945"},{"product_id":"16-poliges-breadboardkabel-jumper-kabel-meterware","title":"Breadboard jumper wires 16-core - sold by the meter, 0.34 mm² per conductor","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable for breadboards and plug-in boards, 16 conductors in one cable\u003c\/li\u003e \u003cli\u003eSupplied by the metre, conductors freely bonded together\u003c\/li\u003e \u003cli\u003eCross-section of 0.34 mm² per conductor\u003c\/li\u003e \u003cli\u003eOperating temperature range -20 to +80 °C\u003c\/li\u003e \u003cli\u003eBundle of 16 individual wires without individual insulation between the conductors\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis 16-pin jumper cable is supplied by the metre and is suitable for connecting components on breadboards and plug-in boards. The 16 parallel conductors can be cut to the required length and separated individually as needed.\u003c\/p\u003e \u003cp\u003eEach conductor has a cross-section of 0.34 mm² and carries voltages up to the typical logic levels of 5 V or 3.3 V. The lack of an insulating layer between the individual conductors in the bundle requires careful handling and neat work to prevent adjacent conductors from short-circuiting during assembly.\u003c\/p\u003e \u003cp\u003eThe cable is ideal for rapid prototyping on breadboards, for example for connecting sensors to microcontroller boards or for building circuits during the development phase. The cable supplied by the metre eliminates the need to store many preassembled individual cables and is more cost-effective when larger quantities of connections are required.\u003c\/p\u003e \u003cp\u003eBefore use, the cable must be divided into the required lengths, and the individual conductors can be fitted with wire end ferrules or crimp contacts as needed. If you need mechanically durable connections or expect frequent reconnecting, you should use preassembled cables with contact pins instead. The operating temperature limits of -20 to +80 °C must be observed.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eCheck the polarity and circuit logic before connecting to live components to prevent damage. The cable is intended exclusively for prototype assembly and testing and development purposes and is not suitable for electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1 metre 16-pin breadboard cable, jumper cable - supplied by the metre\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997943603549,"sku":"F23106770","price":1.67,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/16-poliges-breadboardkabel-jumper-kabel-meterware-funduino-1394969.jpg?v=1791496240"},{"product_id":"40-stuck-breadboardkabel-weiblich-weiblich-10cm","title":"Female-to-female breadboard wires - 40 pieces, 10 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40 jumper wires for breadboards, female connectors on both ends\u003c\/li\u003e \u003cli\u003eLength: 10 cm\u003c\/li\u003e \u003cli\u003eFor wiring sensors, actuators, and modules on breadboards\u003c\/li\u003e \u003cli\u003eSorted by individual colors for quick identification\u003c\/li\u003e \u003cli\u003eReady to use without further preparation\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese jumper wires connect components and modules on standard breadboards. With female connectors on both ends, they fit the pins of sensor ICs, microcontroller pins, and other components equipped with standard pin headers. The 10 cm length allows flexible layouts on small and medium-sized breadboards without unnecessary loops.\u003c\/p\u003e \u003cp\u003eThe set contains 40 single-color wires, allowing them to be grouped by color: red wires for positive connections, black for ground, and colored wires for signals. This saves time during setup and makes wiring errors less likely. When testing sensor circuits, prototyping control systems, or building educational projects, they eliminate the time-consuming need to strip and assemble individual wires.\u003c\/p\u003e \u003cp\u003eA standard breadboard with 2.54 mm hole spacing is required. The wires must be inserted into the sockets by hand; no soldering iron is needed. With frequent use, the contacts may wear out over time, which can be slowed by occasional cleaning with a lint-free cloth.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe wires are intended exclusively for building prototypes and for testing and development purposes on breadboards. They must not be installed in household electrical circuits or mains-voltage applications. If you have questions about integration into more complex systems, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece female\/female breadboard jumper wire set (10 cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997948453213,"sku":"F23108596","price":1.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-weiblichweiblich-10cm-funduino-8742916.png?v=1791496288"},{"product_id":"40-stuck-breadboardkabel-weiblich-mannlich-100cm","title":"Female-to-male breadboard wires - 40 pieces, 100 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFemale-to-male breadboard jumper wires, 100 cm long\u003c\/li\u003e \u003cli\u003e40 pieces per pack\u003c\/li\u003e \u003cli\u003eFor building circuits on breadboards\u003c\/li\u003e \u003cli\u003eConnecting components to microcontroller pins\u003c\/li\u003e \u003cli\u003eColor-coded insulation for identifying signals and power lines\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese jumper wires connect breadboards to microcontroller boards or other electronic components. The female connector plugs into the breadboard rows, while the male connector connects to the pin header of a board. With a length of 100 cm, even physically separated components can be connected without disrupting the circuit.\u003c\/p\u003e \u003cp\u003eThe pack of 40 wires provides enough choice for several simultaneous projects or replacements for damaged wires. The color-coded insulation helps distinguish signals and power lines at a glance and avoid incorrect connections. The wires fit all common breadboards and microcontroller boards with standard pin headers.\u003c\/p\u003e \u003cp\u003eTypical applications include building prototypes with Arduino, Raspberry Pi, or similar boards, experimenting with sensors and actuators, and wiring temporary measurement equipment. The generous length of 100 cm allows for flexible arrangements, even when the breadboard and controller are physically separated.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThese wires are intended exclusively for building prototypes and for testing and development purposes. They must not be installed in household electrical circuits. Work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/female breadboard jumper wire set (100cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997948780893,"sku":"F23106534","price":3.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-weiblichmaennlich-100cm-funduino-8512109.png?v=1791495578"},{"product_id":"40-stuck-breadboardkabel-mannlich-mannlich-30cm","title":"Male-to-male breadboard wires - 40 pieces, 30 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection wires for breadboards, 40 pieces\u003c\/li\u003e \u003cli\u003eLength 30 cm, male-male\u003c\/li\u003e \u003cli\u003eTinned copper wires with plastic sleeves\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese breadboard connection wires connect components on breadboards and stripboards. The set of 40 pieces covers typical project setups without requiring individual wires to be stripped and crimped.\u003c\/p\u003e \u003cp\u003eThe wires end on both sides in spring-loaded connectors that fit into the breadboard's contact holes. The 30 cm length is sufficient for connections between adjacent assemblies in a test setup, but is not long enough for greater distances.\u003c\/p\u003e \u003cp\u003eThe set is suitable for beginners who want to quickly build and modify various circuits without spending time soldering. Experienced developers use it for prototypes and development setups when the wiring needs to remain flexible. For very complex setups, 40 wires may not be enough; in that case, an additional set or individual longer connections are required.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis set is intended exclusively for building prototypes and for testing and development purposes. The wires are not suitable for operation at mains voltage.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/male breadboard wire set (30 cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997948813661,"sku":"F23107186","price":2.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichmaennlich-30cm-funduino-7855757.png?v=1791496295"},{"product_id":"steckkabel-jst-ph2-0mm-2-p-20cm","title":"JST PH connector cable - 2-pin, 2.0 mm pitch, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-PH connector cable, 2-pin, 20 cm long\u003c\/li\u003e \u003cli\u003e2.0 mm pitch connector spacing\u003c\/li\u003e \u003cli\u003eFor battery connections and sensor modules\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eFlat cables, single-sided assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connector cable connects power supplies and sensor modules with JST-PH connections. The 2.0 mm pitch determines compatibility. The cable fits battery holders, charge controllers, and many sensor boards that use this standard.\u003c\/p\u003e \u003cp\u003eThe cables are flat and assembled on one side, reducing the space required in tight enclosures. Gold-plated contacts reduce contact resistance and connection problems. With a length of 20 cm, the cable can bridge the distance between the power source and the load without creating too much slack inside the enclosure.\u003c\/p\u003e \u003cp\u003eThe cable is suitable for battery packs in mobile robots, sensor modules in wireless measurement systems, and portable IoT devices with removable batteries. The JST-PH standard is also widely used in drones and portable environmental measuring devices.\u003c\/p\u003e \u003cp\u003eReplacement cables of this type are useful for projects when original connections are worn or prototypes need to be assembled. Before purchasing, check the connector orientation of the target board to prevent reverse polarity.\u003c\/p\u003e \u003ch3\u003eSafety notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for assembling prototypes and for testing and development purposes. Incorrect polarity can damage connected devices. Check the connection polarity before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST PH2.0mm connector cable - 2 P - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997951107421,"sku":"F23106643","price":0.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-2-p-20cm-funduino-6735442.png?v=1791496044"},{"product_id":"steckkabel-jst-xh2-54mm-3p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 3-pin, male, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH connector cable (3-pin, male)\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eCan be used individually or as a replacement for standard connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable connects JST-XH connectors to each other or connects components with XH sockets. The three contacts are gold-plated and housed in a robust plastic housing, enabling secure plug connections without tools.\u003c\/p\u003e \u003cp\u003eWith a length of 20 centimeters, the cable fits most prototypes and hobby projects, for example when connecting batteries to charge controllers, motors to control modules, or sensors in larger assemblies. Several such cables can be used in parallel to separate different circuits.\u003c\/p\u003e \u003cp\u003eThe cable works with all components that use standard XH connectors. Correct polarity is important; incorrectly inserted cables can cause damage. For permanent use, a permanent connection (soldering) should be preferred.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eEnsure correct polarity when connecting the cable to prevent damage to electronic components. This product is intended exclusively for building prototypes and for testing and development purposes. It is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm plug cable - 3 P - Male - 20cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997953139037,"sku":"F23106486","price":1.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-3p-maennlich-20cm-funduino-9433788.png?v=1791495113"},{"product_id":"steckkabel-jst-xh2-54mm-4p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 4-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnecting cable with JST XH2 connectors, 4-pin\u003c\/li\u003e \u003cli\u003eLength 20 cm\u003c\/li\u003e \u003cli\u003eMale connector to female connector\u003c\/li\u003e \u003cli\u003ePitch 2.54 mm\u003c\/li\u003e \u003cli\u003eSuitable for prototyping and model making\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis connecting cable connects JST-XH2 sockets to compatible connectors and is suitable for safely wiring batteries, rechargeable batteries, and loads in development projects. The male connector fits into pin headers, while the female side accepts a standard connector.\u003c\/p\u003e \u003cp\u003eThe cable measures 20 cm, which is sufficient for connections on perfboards or between assemblies positioned close together. A longer cable is required for greater distances between components. The 2.54 mm pitch corresponds to the standard used for laboratory power supplies and common battery connections.\u003c\/p\u003e \u003cp\u003eThe cable is used to connect LiPo batteries to charging systems, connect power supplies and loads on breadboards, and build portable electronics projects powered by batteries. The insulated connectors reduce the risk of short circuits when working on laboratory setups.\u003c\/p\u003e \u003cp\u003eBoth connected devices or pin headers must have JST-XH2 connections, or the wiring must be adapted accordingly. The cable is intended exclusively for direct voltages up to 48 V.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eWhen connecting batteries and rechargeable batteries, ensure that the polarity is correct. The cable is intended exclusively for prototyping, testing, and development purposes and is not suitable for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 4 P - Male - 20cm connecting cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997953302877,"sku":"F23106438","price":1.11,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-4p-maennlich-20cm-funduino-9057234.png?v=1791495106"},{"product_id":"steckkabel-jst-ph2-0mm-3-p-20cm","title":"JST PH 3-pin connector cable - 2,0 mm pitch, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJumper cable with 3-pin JST-PH connectors\u003c\/li\u003e \u003cli\u003eCable length: 20 cm\u003c\/li\u003e \u003cli\u003ePitch: 2.0 mm\u003c\/li\u003e \u003cli\u003eSingle-ended\u003c\/li\u003e \u003cli\u003eSuitable for battery connections and sensor connections\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis jumper cable securely connects components with JST-PH connectors. The 2.0 mm pitch standard is commonly used with lithium-polymer batteries, battery holders, and sensor modules. The cable is 20 cm long, making it compact enough for tight installation spaces while still providing sufficient flexibility for layouts in prototypes.\u003c\/p\u003e \u003cp\u003eThe cable connects power sources to power consumers or sensors to controller boards without requiring additional soldering or adapters. The contacts are factory-crimped, so no on-site assembly is required.\u003c\/p\u003e \u003cp\u003eCommon applications include connecting LiPo batteries to charge controllers or switches, connecting temperature sensors to data acquisition modules, and powering GPS modules in portable systems. The JST-PH standard is also used for wiring LED strips or servos.\u003c\/p\u003e \u003cp\u003eFor the cable to fit, the target components must have JST-PH sockets or be capable of being adapted to a PH connector. The contacts gradually wear with frequent connection and disconnection. For more robust permanent-load connections, soldered cables are the better choice.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eBefore first use, check the correct polarity and pin assignment in the circuit diagram. The cable is intended exclusively for building prototypes and for testing and development purposes. If you are unsure about the current-carrying capacity or compatibility with the target components, consult a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST PH2.0mm - 3 P - 20cm jumper cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997958545757,"sku":"F23106638","price":0.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-ph20mm-3-p-20cm-funduino-4637356.png?v=1791495152"},{"product_id":"kabel-mit-jst-xh2-54-stecker-3p-200mm-a-b-26awg-gedreht","title":"JST XH2.54 connecting cable - 3-pin, 200 mm, 26 AWG, A-B twisted","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable with JST-XH2-54 connector, 3-pin\u003c\/li\u003e \u003cli\u003eLength 200 mm\u003c\/li\u003e \u003cli\u003eWire cross-section 26 AWG (approx. 0.12 mm²)\u003c\/li\u003e \u003cli\u003ePre-assembled with a connector on both sides\u003c\/li\u003e \u003cli\u003eColor gray\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connection cable with JST-XH2-54 connectors connects pre-assembled modules and sensors equipped with this connector type. The 200 mm length allows distances of up to approximately 20 cm between components; extensions are required for greater distances. Identical connectors are fitted on both sides, allowing the cable to be used without modification in daisy-chain connections or between compatible hardware.\u003c\/p\u003e \u003cp\u003eThe three wires provide a supply voltage and ground connection as well as a signal pair. With 26 AWG, the cross-section is suitable for low current consumption of up to approximately 3 amperes; at higher currents, voltage drop across the cable may occur. The JST-XH2 standard provides a secure connection, preventing accidental disconnection, but can be somewhat difficult to remove by hand.\u003c\/p\u003e \u003cp\u003eThe cable is used for connections to battery modules, LED strip controllers, or current sensors in prototypes. In the field assembly of multi-sensor systems, its pre-assembled design saves time compared with soldering. Projects with more than three connection wires require multiple cables or a cable harness.\u003c\/p\u003e \u003cp\u003eIt is important to ensure that the connector type is compatible with the target modules; this connector type is not universal but is limited to JST-XH2-compatible devices. Extensions or polarity reversals must be soldered by hand if the standard cable does not match the required length or pinout.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes and is not suitable for installation in household electrical circuits. Consult a qualified electrician before commissioning if higher current ratings or unclear voltage specifications are involved.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x cable with JST XH2.54 connector 3P 200mm A-B 26AWG twisted\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997971161437,"sku":"F23110343","price":0.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/kabel-mit-jst-xh254-stecker-3p-200mm-a-b-26awg-gedreht-funduino-7163177.png?v=1791496117"},{"product_id":"micro-usb-kabel-auf-usb-a-150cm-schwarz","title":"Micro-USB cable to USB-A - 150 cm, black","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable from USB-A plug to Micro-USB plug\u003c\/li\u003e \u003cli\u003eLength: 150 cm\u003c\/li\u003e \u003cli\u003eBlack\u003c\/li\u003e \u003cli\u003eFor power supply and data transmission\u003c\/li\u003e \u003cli\u003eFlexible PVC sheath\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable connects USB-A sockets to devices with a Micro-USB port. The 150 cm length provides space between a board or power supply and the connected module, allowing adjustments to the setup even while measurements or tests are in progress.\u003c\/p\u003e \u003cp\u003eThe cable handles power supply and data transmission simultaneously. When operating sensors or controllers with 5 V logic, the full voltage is maintained; for 3.3 V systems, a throttle or reducer is required. Repeatedly plugging and unplugging the cable will not damage the Micro-USB port as long as force is applied perpendicular to the plug plane.\u003c\/p\u003e \u003cp\u003eIt typically supplies power to development boards, sensor modules, small robotics platforms, or single-board computers, or connects them to a PC for programming. The 150 cm length also makes the cable suitable for setups with multiple modules when the station is permanently mounted and a connection is only temporarily needed.\u003c\/p\u003e \u003cp\u003eThe cable is sufficient for continuous operation; anyone who frequently changes the connection should pay attention to reinforced connectors. Protection circuits in the connected device prevent damage caused by reverse polarity or voltage spikes.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. It must not be integrated into the household power circuit. If the sheath is damaged or the plugs show visible defects, the cable must no longer be used.\u003c\/p\u003e \u003ch4\u003ePackage contents\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Micro-USB cable to USB-A - 150cm, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997972177245,"sku":"F23107177","price":1.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/micro-usb-kabel-auf-usb-a-150cm-schwarz-funduino-1226684.png?v=1791496323"},{"product_id":"40-stuck-breadboardkabel-weiblich-weiblich-30cm","title":"Female-to-female breadboard wires - 40 pieces, 30 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cables for breadboards, 30 cm long\u003c\/li\u003e \u003cli\u003eFemale connectors on both ends\u003c\/li\u003e \u003cli\u003e40 pieces per set\u003c\/li\u003e \u003cli\u003eDesigned for wiring sensor and actuator modules to one another\u003c\/li\u003e \u003cli\u003eAllows components to be rearranged flexibly without soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese breadboard connection cables allow modules and components to be connected to one another on breadboards without soldering. The female connectors on both ends fit the standard pin headers of common sensor and actuator modules as well as microcontroller boards. At 30 centimetres long, the cables conveniently bridge distances between adjacent components on the board or in its immediate vicinity.\u003c\/p\u003e \u003cp\u003eThe set of 40 cables covers typical projects with six to ten modules. The colour coding - red for power supply, black for ground, and multiple colours for signal lines - supports error-free wiring. Rewiring is done simply by reconnecting the cables, without interrupting the circuit.\u003c\/p\u003e \u003cp\u003eThese cables are used in prototypes with temperature sensors, motion detectors, or relay modules, in measurement setups for students or hobby projects, and when testing sensor-actuator combinations before final assembly. The connectors provide secure connections as long as the connected modules use the standard 2.54-millimetre pitch.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cables are intended exclusively for prototyping, testing, and development purposes. They are not suitable for permanent wiring in electrical circuits. When working with mains voltage, a qualified electrician must be consulted.\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65997975683421,"sku":"F23106859","price":2.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-weiblichweiblich-30cm-funduino-3159876.png?v=1791495598"},{"product_id":"40-stuck-breadboardkabel-mannlich-mannlich-100cm","title":"Male-to-male breadboard wires - 40 pieces, 100 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40 male-to-male jumper wires for breadboards\u003c\/li\u003e \u003cli\u003e10 cm long, for prototypes and circuit assembly\u003c\/li\u003e \u003cli\u003eInsulated copper wire, gold-plated contacts\u003c\/li\u003e \u003cli\u003eFlexible and reusable\u003c\/li\u003e \u003cli\u003eColor coding for tracing circuits\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThese jumper wires connect components directly on a breadboard without soldering. Each of the 40 wires is 10 cm long and has male contact pins at both ends that fit into the holes of the breadboard. The gold-plated contacts reduce contact resistance and oxidation.\u003c\/p\u003e \u003cp\u003eThe assortment is sufficient for beginner experiments and medium-sized circuits in the prototyping stage. The color coding makes it possible to visually distinguish power, ground, and signals, which helps during assembly and troubleshooting. With frequent reconnecting, the pins may become less secure over time.\u003c\/p\u003e \u003cp\u003eExample applications include digital logic experiments, sensor test setups with simple microcontroller boards, and wiring LEDs and resistors in initial electronics projects. For larger circuits or permanent installations, 40 wires may not be sufficient.\u003c\/p\u003e \u003cp\u003eThe wires can be used with standard breadboards and compatible boards with a 2.54 mm pitch. Additional adapters are required for connections with other connector types or different pitches.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThese wires are intended exclusively for building prototypes and for testing and development purposes. Use in circuits with high voltages or in permanent installations is not permitted. Work involving household electrical installations must be carried out by a qualified electrician.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male-to-male breadboard wire set (100 cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998001963357,"sku":"F23106535","price":3.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichmaennlich-100cm-funduino-2488001.png?v=1791495197"},{"product_id":"verlangerungskabel-fur-microsd-karten-48cm-kabellange","title":"MicroSD Extension Cable - 48 cm, flat and flexible","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eAdapter cable for extending MicroSD card slots by 48 cm\u003c\/li\u003e \u003cli\u003eConnection via standard MicroSD socket and plug\u003c\/li\u003e \u003cli\u003eEnables memory cards to be installed in hard-to-reach or spatially remote positions\u003c\/li\u003e \u003cli\u003eFlat, flexible cable for easy routing in tight enclosures\u003c\/li\u003e \u003cli\u003eSuitable for single-board computers, data loggers, and embedded systems\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis extension cable brings MicroSD card slots to locations where they do not fit structurally or where the memory card must remain accessible during operation. The 48 cm cable bridges the distance between the data device and the card's installation location without requiring additional adapters.\u003c\/p\u003e \u003cp\u003eThe cable connects directly to the device's MicroSD socket and terminates in a standard MicroSD plug. Please note that the card's transfer speed remains dependent on the host device's specifications; the cable itself does not impair data transfer. The contacts are gold-plated, reducing corrosion and improving connection reliability.\u003c\/p\u003e \u003cp\u003eTypical applications include externally mounting memory cards on weatherproof data loggers, positioning them in camera systems where the card needs to be replaced from the outside, or spatially separating the storage medium from the controller in prototype setups. The cable also provides a solution for cramped enclosures where MicroSD slots would be obstructed.\u003c\/p\u003e \u003cp\u003eA host device with a standard MicroSD card slot is required. The cable is not designed for constant insertion and removal; repeated mechanical stress may loosen the contacts. Operating temperatures between 0 and 60 degrees Celsius are supported.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThe cable is intended exclusively for building prototypes and for testing and development purposes. Make sure the polarity is correct when connecting it; a connection with reversed polarity can damage the host device or memory card. If the cable is damaged or the contacts are insecure, inspect it before further use.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x MicroSD card extension cable - 48 cm cable length\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998026408285,"sku":"F23107189","price":5.55,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/verlaengerungskabel-fuer-microsd-karten-48cm-kabellaenge-funduino-2217711.png?v=1791496147"},{"product_id":"steckbrucken-set-aluminium-140-stuck-in-versch-langen","title":"Jumper Wire Set - 140 pieces, 14 lengths, 2-125 mm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e140 preformed jumper wires for breadboards, 14 lengths from 2 to 125 mm\u003c\/li\u003e \u003cli\u003e6 colors for identifying connection groups\u003c\/li\u003e \u003cli\u003eEnds bent at right angles for direct insertion without tools\u003c\/li\u003e \u003cli\u003eCopper wire with plastic insulation, 0.6 mm diameter\u003c\/li\u003e \u003cli\u003eReusable, no soldering required\u003c\/li\u003e \u003cli\u003eSorting box with compartments for all lengths and colors included\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis set consists of 140 jumper wires for connecting contact points on breadboards. Each jumper is cut to a fixed length and bent at right angles at both ends, allowing it to be inserted directly into the contact rows without tools. The copper wire with plastic insulation has a diameter of approximately 0.6 mm and remains dimensionally stable even after repeated insertion and removal.\u003c\/p\u003e \u003cp\u003eThe 14 different lengths range from 2 to 125 mm, with ten of each length included in the set. In addition, the 6 colors enable clear organization of connection groups in the circuit, which is particularly helpful when building more complex projects. Since the jumpers are reusable and no soldering is required, test setups can be assembled quickly and easily modified.\u003c\/p\u003e \u003cp\u003eThe set is suitable for prototyping on breadboards as well as for electronic learning projects and wiring microcontroller circuits. A plastic box with compartments is included for storing the jumpers sorted by length and color. For operation, simply insert the jumpers into a compatible breadboard with a 2.54 mm pitch.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThe jumper wires are intended exclusively for building prototypes and for testing and development purposes on breadboards. They are not suitable for installation in mains-voltage circuits. Work on or in the immediate vicinity of electrical installations is reserved for qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cp\u003e1* Jumper wire set - Aluminum - 140 pieces in various lengths\u003c\/p\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998090109277,"sku":"F23107323","price":2.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckbruecken-set-aluminium-140-stueck-in-versch-laengen-funduino-1567551.png?v=1791496361"},{"product_id":"steckkabel-jst-xh2-54mm-3p-weiblich-20cm","title":"JST XH connector cable 3-pin - female, 2.54 mm, 20 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eFemale JST-XH connector cable, 3-pin, 20 cm long\u003c\/li\u003e \u003cli\u003e2.54 mm pitch, compatible with standard pin headers and connector headers\u003c\/li\u003e \u003cli\u003ePre-assembled and ready to use without soldering\u003c\/li\u003e \u003cli\u003eCurrent-carrying capacity of up to 3 A per contact\u003c\/li\u003e \u003cli\u003ePolyamide housing with locking mechanism\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis connector cable connects components via a JST-XH connector with female contacts. The 3-pin version, with a length of 20 cm, is suitable for connections between sensor modules, battery packs, and controllers in prototype setups. The standard 2.54 mm pitch enables direct connection to common pin headers and header connectors found on development boards and modules.\u003c\/p\u003e \u003cp\u003eThe JST-XH connector consists of gold-plated contacts in a form-fitting plastic housing with a locking mechanism. This prevents accidental disconnection caused by vibration and ensures reliable contact. Each of the three poles can carry up to 3 A, which is sufficient for most sensor and actuator applications. No calibration or configuration is required; the cable works as soon as it is plugged in.\u003c\/p\u003e \u003cp\u003eThe cable is useful wherever multipole signals or power supplies need to be connected quickly without spending time soldering. Typical applications include powering module batteries, connecting multiple sensors to controllers, or wiring LED strips in prototype projects.\u003c\/p\u003e \u003cp\u003eA compatible female counterpart with a JST-XH pin header on the receiving side is required. For high-current applications exceeding 3 A per wire, thicker wire gauges are required, which are not compatible with this connector.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eImproper wiring or exceeding the specified current ratings may create a fire hazard; check for incorrect polarity. The cable is intended exclusively for prototype assembly and testing and development purposes, not for installation in household electrical circuits. If you are unsure about proper use, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 3P - Female - 20cm connector cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998123008349,"sku":"F23108702","price":0.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-3p-weiblich-20cm-funduino-4764411.jpg?v=1791495288"},{"product_id":"steckkabel-jst-xh2-54mm-2p-mannlich-20cm","title":"JST XH connector cable 2.54 mm - 2-pin, male, 20 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH connector cable, 2-pin, 20 cm length\u003c\/li\u003e \u003cli\u003eMale connector to bare wire ends\u003c\/li\u003e \u003cli\u003eRated current: 3 A per contact\u003c\/li\u003e \u003cli\u003eOperating voltage up to 250 V\u003c\/li\u003e \u003cli\u003eSoldered contacts\u003c\/li\u003e \u003cli\u003eXH design enables daisy-chaining of up to six modules\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThis cable with a JST-XH connector connects electronic modules or power sources via a two-pin connection. The male connector is located on one side, while the other side terminates in bare wire ends that can be crimped or soldered for power supply or data exchange with other devices. With a length of 20 cm, the cable can be integrated into compact setups with short cable runs without being too short for larger distances.\u003c\/p\u003e \u003cp\u003eThe connector has male contacts and plugs into the corresponding socket on a module. The cable is designed for operation at voltages up to 250 V and currents up to 3 A per contact. If the other side is already fitted with a Fritz connector, soldering is not required; if open wiring is present, the wire ends are connected to the target power source or module. The soldered contacts provide a secure connection without oxidation over extended periods.\u003c\/p\u003e \u003cp\u003eApplications include building sensor circuits, powering small motors via control boards, and flexibly connecting battery taps to prototype boards. Particularly in battery-powered projects, the pluggable system enables quick switching between different power sources or loads without having to rewire the setup.\u003c\/p\u003e \u003cp\u003eThe cable requires a suitably rated power supply or a module with a JST-XH socket on the other side. The wire cross-sections must match the intended current; heat generation must be taken into account at higher power levels. Anyone working with higher currents or voltages should check the load capacity of the soldered contacts before commissioning.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for building prototypes and for testing and development purposes, not for integration into household electrical circuits. High-current applications require careful sizing and inspection; if there is any doubt about the load capacity, consult a qualified electrician before commissioning. Check the polarity before connecting to prevent damage to sensitive devices.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm - 2P - Male - 20cm connector cable\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998149091677,"sku":"F23108541","price":0.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-2p-maennlich-20cm-funduino-5426903.png?v=1791495301"},{"product_id":"40-stuck-breadboardkabel-mannlich-mannlich-50cm","title":"Male-to-male breadboard wires - 40 pieces, 50 cm","description":"\u003ch3\u003eProduct overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40 jumper wires for breadboards, each 50 cm long\u003c\/li\u003e \u003cli\u003eMale connectors on both ends\u003c\/li\u003e \u003cli\u003eEnable point-to-point connections on breadboards and between components\u003c\/li\u003e \u003cli\u003eColor coding for identifying circuit groups\u003c\/li\u003e \u003cli\u003eTinned contact pins for a reliable fit\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct description\u003c\/h3\u003e \u003cp\u003eThese breadboard jumper wires connect components directly on breadboards or between adjacent modules. At 50 cm each, they can bridge larger distances; the quantity of 40 wires covers typical prototype circuits of medium complexity.\u003c\/p\u003e \u003cp\u003eThe male connectors fit into the contact holes of standard breadboards and module connectors. The tinned contact pins provide a reliable fit and prevent loose connections that could fail during longer projects. The color coding makes it easier to distinguish power supply lines, ground connections, and signal paths.\u003c\/p\u003e \u003cp\u003eApplications include building sensor and actuator networks on breadboards, test setups for controller boards, and prototypes of circuits with multiple distributed components. The advantage of the pre-cut length is particularly apparent in experimental setups with many branching connections: neither too short nor too long, with no crimping required.\u003c\/p\u003e \u003cp\u003eA breadboard or module connectors with standard contact holes (0.1-inch pitch), as well as the corresponding components and modules, are required. The wires do not replace the breadboard itself.\u003c\/p\u003e \u003ch3\u003eSafety information\u003c\/h3\u003e \u003cp\u003eThis material is intended exclusively for building prototypes and for testing and development purposes. It is not intended for installation in household electrical circuits. Work on or near electrical installations must be carried out by qualified electricians.\u003c\/p\u003e \u003ch4\u003eScope of delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e40 male\/male breadboard jumper wires (50cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998219739485,"sku":"F23107202","price":2.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichmaennlich-50cm-funduino-3060520.png?v=1791495366"},{"product_id":"steckkabel-jst-xh2-54mm-2p-mannlich-10cm","title":"JST XH connector cable 2.54 mm - 2-pin, male, 10 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eJST-XH2 connector cable, 2-pin, 10 cm length\u003c\/li\u003e \u003cli\u003eMale connector, 2.54 mm contact spacing\u003c\/li\u003e \u003cli\u003eGold-plated contacts\u003c\/li\u003e \u003cli\u003eFor battery connections and power distribution in prototypes\u003c\/li\u003e \u003cli\u003eCompatible with common LiPo batteries and chargers\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThe cable with a JST-XH2 connector safely connects batteries, chargers, and power distribution boards. The male connector with 2.54 mm contact spacing fits the female sockets on LiPo batteries and commercial chargers. The 10 cm length provides enough flexibility to separate the battery and controller without placing the boards directly on top of each other.\u003c\/p\u003e \u003cp\u003eThe gold-plated contacts ensure reliable power connections without oxidation. The JST-XH2 standard is widely used in model making and robotics, making the connectors and sockets easy to interchange. The cable is suitable for operating voltages up to 6 V.\u003c\/p\u003e \u003cp\u003eThe cable can be used in drone setups, small battery-powered robotic vehicles, and development boards where the battery and electronics need to be separated. The standardized connector is also advantageous for quickly switching between different battery modules. In everyday project work, this saves soldering and enables easy battery replacement.\u003c\/p\u003e \u003cp\u003eWhen connecting the cable directly to chargers, the polarity must be correct. Obtaining additional cables or adapters is left to the project when multiple power distribution points are located far apart.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eCaution: Reversing the polarity will damage the battery and connected devices. The cable is intended exclusively for building prototypes and for testing and development purposes, and is not intended for installation in household electrical circuits.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x JST XH2.54mm cable - 2P - Male - 10cm\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998246183261,"sku":"F23110287","price":0.57,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/steckkabel-jst-xh254mm-2p-maennlich-10cm-funduino-6387592.png?v=1791495446"},{"product_id":"40-stuck-breadboardkabel-mannlich-mannlich-20cm","title":"Male-to-male breadboard wires - 40 pieces, 20 cm","description":"\u003cp\u003e\u003cstrong\u003eOverview: \u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\n\u003cspan\u003eProvides a fast, secure, solderless connection from microcontrollers to \u003c\/span\u003ebreadboards\u003cspan\u003e,\u003c\/span\u003e \u003cspan\u003esensors, and other modules\u003c\/span\u003e\n\u003c\/li\u003e \u003cli\u003e40 wires that can each be separated from the bundle\u003c\/li\u003e \u003cli\u003eConnector type: male\/male\u003c\/li\u003e \u003cli\u003e\u003cspan\u003e20cm long\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003eWeight: 28g\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eScope of delivery:\u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/male breadboard wire set (20cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998294679901,"sku":"FUN-1010558","price":1.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichmaennlich-20cm-funduino-9757908.png?v=1791496598"},{"product_id":"65-stuck-breadboard-kabel-fur-arduino","title":"Male-to-male breadboard wires - 65 pieces, 2,54 mm pitch","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e65 breadboard jumper wires with contacts on both ends\u003c\/li\u003e \u003cli\u003eVarious lengths and colors for flexible wiring\u003c\/li\u003e \u003cli\u003e2.54 mm pitch compatible with standard breadboards and microcontroller boards\u003c\/li\u003e \u003cli\u003eNo soldering required, reusable as often as needed\u003c\/li\u003e \u003cli\u003eColor-coded to distinguish voltages and signals\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese 65 jumper wires connect components on breadboards without soldering. Each wire has a male contact on both ends with the standard 2.54 mm pitch used by the pin headers on Arduino, Raspberry Pi, and comparable boards. They fit both between the holes of a breadboard and directly onto the pin rows of development boards.\u003c\/p\u003e \u003cp\u003eThe set contains wires in several lengths and colors. Short wires bridge adjacent rows, while longer pieces span connections across the entire board. The color coding makes it easy to distinguish supply voltage, ground, and signal lines at a glance. Since the contacts fit securely but can be removed at any time, a circuit can be reconfigured as often as needed.\u003c\/p\u003e \u003cp\u003eThese wires are typically used when building test circuits, connecting sensors, LEDs, resistors, and modules to a microcontroller without permanent soldering. Plug-in modules such as real-time clocks, humidity sensors, or SD card readers can also be connected quickly and replaced when necessary. Circuit assembly is iterative, allowing changes to be made within minutes.\u003c\/p\u003e \u003cp\u003eThe set covers typical projects with individual sensors and output components. Larger setups with many modules may require additional wires. The contacts are not suitable for high-frequency applications or high-current circuits.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThese jumper wires are intended exclusively for building prototypes and for testing and development purposes. They must not be installed in household electrical systems. When working with voltages above 48 volts, or if you are uncertain about circuit safety, consult a qualified electrician before starting the assembly.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 65-piece breadboard cable set for Arduino\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998297432413,"sku":"F23107287","price":3.49,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/65-stueck-breadboard-kabel-fuer-arduino-funduino-1384155.png?v=1791496425"},{"product_id":"40-stuck-breadboardkabel-mannlich-weiblich-10cm","title":"Male-to-female breadboard wires - 40 pieces, 10 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cables for breadboards, 10 cm each\u003c\/li\u003e \u003cli\u003e40 pieces with single-ended plug contacts (female and male)\u003c\/li\u003e \u003cli\u003eInsulating sleeves in various colors for tracing circuit diagrams\u003c\/li\u003e \u003cli\u003eFor prototyping on standard breadboards\u003c\/li\u003e \u003cli\u003eFlexible wires without soldering\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eBreadboard connection cables connect components and terminal strips on breadboards without soldering. The 10-centimeter length covers typical distances on standard boards, which saves space, especially in densely populated circuits. The 40 pieces are sufficient for multi-component setups or replacing worn contacts.\u003c\/p\u003e \u003cp\u003eOne end of the cable has a plug (male), while the other has a female connector, making it suitable for connecting components with rigid leads or linking breadboard rows. The insulated plastic sleeve is color-coded, allowing colors to be assigned according to the circuit diagram and keeping the wiring organized.\u003c\/p\u003e \u003cp\u003eSuitable for test setups with microcontroller boards, prototyping sensor circuits, or connecting power supply and ground. A typical scenario is an Arduino-compatible board mounted on the breadboard, with its connection pins wired to sensor and actuator rows using the male-to-female cables.\u003c\/p\u003e \u003cp\u003eOnly a standard breadboard is required for use. The contacts are designed for up to approximately 5,000 insertion cycles and will then wear out; replacement cables are available for this purpose.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThese cables are intended exclusively for building prototypes and for testing and development purposes and are not suitable for installation in household electrical circuits. They are not sufficiently insulated for operating voltages above 36 volts. Work on or near electrical installations must be carried out by qualified electricians; if in doubt, consult a qualified electrician before commissioning.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/female breadboard cable set (10cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998300709213,"sku":"F23107424","price":1.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichweiblich-10cm-funduino-1561926.png?v=1791496456"},{"product_id":"micro-usb-kabel-auf-usb-a-30cm-schwarz","title":"Micro-USB cable - to USB-A, 30 cm, black","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003eConnection cable between Micro-USB devices and USB-A ports\u003c\/li\u003e \u003cli\u003eLength: 30 cm\u003c\/li\u003e \u003cli\u003eBlack\u003c\/li\u003e \u003cli\u003eSuitable for power supply and data transfer\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThis cable connects microcontroller boards, sensors, and other devices with a Micro-USB port to computers or power sources with a USB-A port. The 30-centimeter length is sufficient for assembling prototypes and test setups on the workbench, while also being suitable for larger setups without taking up excessive space.\u003c\/p\u003e \u003cp\u003eThe cable transfers data and power in parallel, making it suitable both for programming boards and for power supply. Since the length is fixed, the precise arrangement of components on a work surface can be planned in advance. The black design allows for unobtrusive integration into circuit setups.\u003c\/p\u003e \u003cp\u003eTypical applications include developing sensor networks, where prototypes remain permanently connected to a computer, as well as testing boards that need to update their firmware. The cable is also suitable for regularly powering portable devices during development. For longer cable runs or higher current outputs (approximately 2.5 A or more), a thicker cable should be considered.\u003c\/p\u003e \u003ch3\u003eSafety Notice\u003c\/h3\u003e \u003cp\u003eThis cable is intended exclusively for assembling prototypes and for testing and development purposes. It is not intended for continuous operation or installation in household electrical systems.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1* Micro-USB to USB-A cable - 30 cm, black\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998345339229,"sku":"F23109090","price":1.54,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/micro-usb-kabel-auf-usb-a-30cm-schwarz-funduino-8653305.png?v=1791495900"},{"product_id":"40-stuck-breadboardkabel-mannlich-mannlich-10cm","title":"Male-to-male breadboard wires - 40 pieces, 10 cm","description":"\u003ch3\u003eProduct Overview\u003c\/h3\u003e \u003cul\u003e \u003cli\u003e40 breadboard jumper wires\u003c\/li\u003e \u003cli\u003e10 cm long, male connectors on both sides\u003c\/li\u003e \u003cli\u003eRigid, for point-to-point connections on breadboards\u003c\/li\u003e \u003cli\u003eColor-coded to simplify circuit planning\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003eProduct Description\u003c\/h3\u003e \u003cp\u003eThese breadboard wires connect components and contacts directly on breadboards. The rigid design, with male connectors at both ends, plugs into the breadboard holes without additional adapters and enables quick, secure point-to-point connections.\u003c\/p\u003e \u003cp\u003eThe 10 cm length is sufficient for typical distances between components and bus rails on standard breadboards. Longer connections or greater spatial distances require separate jumper wires. Color coding helps with circuit documentation, for example by using the convention of red wires for positive and black wires for ground.\u003c\/p\u003e \u003cp\u003eThe set of 40 pieces provides sufficient spares for larger projects and modifications. Additional wires should be kept in stock for extensive circuits or frequent reconfiguration.\u003c\/p\u003e \u003ch3\u003eSafety Information\u003c\/h3\u003e \u003cp\u003eThese wires are intended exclusively for prototyping and testing and development purposes. They must not be used for connections in household electrical circuits or to mains voltage. A qualified electrician is required for work on or near electrical installations.\u003c\/p\u003e \u003ch4\u003eScope of Delivery\u003c\/h4\u003e \u003cul\u003e \u003cli\u003e1x 40-piece male\/male breadboard wire set (10cm)\u003c\/li\u003e \u003c\/ul\u003e","brand":"Funduino","offers":[{"title":"Default Title","offer_id":65998369849693,"sku":"F23107320","price":1.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1074\/5649\/5965\/files\/40-stueck-breadboardkabel-maennlichmaennlich-10cm-funduino-1346884.png?v=1791496476"}],"url":"https:\/\/funduino.com\/en\/collections\/cable-2.oembed","provider":"Funduino","version":"1.0","type":"link"}